20 Most Recent Cisco Catalyst 4006 Chassis ( 4006) - Page 4 Questions & Answers


That model is limited to 3 phones total. When they say add lines, they are talking synonymously with phones, you cannot upgrade that and it is a small business set, so you would have to get a 5 or 6 phone system to replace the 3 phone system you have.

Cisco Computers... | Answered on Aug 31, 2018


There are 2 ways that the 1921 can support vlans.
If you purchase a 4 or 8 port switch module (EHWIC-4ESG or EHWIC-D-8ESG) for the 1921, the switch module can support 16 vlans.
The other option is set up one of the routed ports with sub-interfaces (one sub-interface per vlan) and attach the port to a trunk port on a switch.
You can create up to 1200 sub-interfaces on the 1900 (although I doubt you'd need that many without maxing the performance specs of the router)

Cisco Computers... | Answered on Aug 22, 2018


Many things could be an issue, without being at the desk it would be hard to tell. First check your ports on MWI and VM. You may also use unity connection's port configuration test and check unity connections server for updates/upgrades have you tried turning MWI off and having someone call and leave a VM.

Cisco Computers... | Answered on Mar 19, 2018


Your password is corrupt in the router. Do a hard reset of your router by holding the reset button in for ten seconds as you power the router up. After that the router will be reset to its defaults. You will have to recreate any settings in the router (WiFi passphrase, ip settings, etc. ) so make certain you have that info ready when you do this.

Cisco Computers... | Answered on Jan 29, 2018


You should contact your account manager directly...not the Fixya website.
picard-facepalm-3ilcbhjxhthdgc5wnjla3ukp-2-0.jpg

Cisco Computers... | Answered on Jan 22, 2018


http://blogs.mathworks.com/steve/2007/08/13/image-deblurring-introduction/
u can get the whole code which u required

Cisco Computers... | Answered on Dec 06, 2017


A Cisco E3200 has a default IP of 192.168.1.1

Make sure you are connected to the router through an ethernet cable if you dont know the current wifi password yet.

Enter that number into your browsers address bar exactly as I had shown. It will ask you for a username and password. Usually for the E3200, the default user and pass are both " admin ", so you should be able to log in rather quick.

From there you can find the security settings and change the password which will look like WPA Key or WPA2-PSK depending on personal preference.

You should choose WPA2-PSK, as its the strongest in terms of security and cannot be hacked easily.

More Information on the E3200:
Linksys Official Support Linksys E3200 High Performance Dual Band Router...

Cisco Computers... | Answered on Oct 25, 2017


To factory reset a router, there should be a reset button on the back of the unit near the power button. Usually you can press and hold this with a pen or pencil (or bent paperclip point) while the unit is plugged in, then unplug the router while holding the reset button down and power it back on. Do this for about 5-10 seconds and it should return it to factory spec.

Cisco Computers... | Answered on Oct 24, 2017


Follow the instructions in this link

https://community.linksys.com/t5/Cisco-Connect/Need-the-guest-password-Here-s-how-to-retrieve-it/td-p/494836

Cisco Computers... | Answered on Oct 20, 2017


Perform these steps in order to recover your password:
  1. Either switch off or shut down the router.
  2. Remove the compact flash that is on the rear of the router. ...
  3. Switch on the router.
  4. Once the router is on Rommon mode, reinsert the compact flash.
  5. Type confreg 0x2142 at the rommon 1> prompt in order to boot from Flash.
  6. if you still confused, you can also visit Router-Switch, There's a lot of answer about network products, You can also seek artificial services here, they will be happy to help you.

Cisco Computers... | Answered on Oct 17, 2017


You can't, otherwise there would be no point in having a password would there!

Cisco Computers... | Answered on Oct 13, 2017

Not finding what you are looking for?
Cisco Catalyst 4006 Chassis ( 4006) Logo

Popular Tags

17 questions posted

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Catalyst Cisco

  • Catalyst Cisco

Most Popular Question

50 port lan switch specification

  • Computers & Internet
Loading...