20 Most Recent Cisco Catalyst 4006 Chassis ( 4006) - Page 6 Questions & Answers


As long as it has Bluetooth.

Cisco Computers... | Answered on Mar 28, 2017


Ik denk dat je een cursus hoe beveilig ik mijn netwerk moet volgen. Er is zoveel mogelijk op het gebied hacken, dat je goed op je tellen moet passen bij het opzetten van een draadloze verbinding. Eigenlijk moet je de naam van de verbinding al zo instellen dat niemand kan zien welk merk en of model router het is. Maar ook je eigen naam mag niet voorkomen. Dan moet je tegenwoordig aan aardig wachtwoord verzinnen. en je ervan bewust zijn dat sommige dingen toch als klare tekst door de lucht gaan.
Ik wens je sterkte bij het oplossen van alle zaken.

Cisco Computers... | Answered on Mar 26, 2017


Greatings !
I put WORKGROUP within the domain name field of the Network tab.
Speedtest moved from 10Mb to 100Mb that is the maximum speed provided by my cableBox (Numericable).
Very good

Thanks a lot to Kasper Mikkelsen

Cisco Computers... | Answered on Mar 22, 2017


We can answer specific questions for you as long as you are specific. Broad questions are difficult to answer in a reasonable amount of time but if you ask us to explain database normalization, that can be handled in a reasonable amount of time.
When you graduate, you will likely get a job with a smaller company. This is simply because there are more of them then larger companies. Smaller companies mean smaller networks which means less work so they will not be able to keep you busy working only on the network. The solution is to either hire somebody part-time or to hire somebody with a related talent that they need. That is where the DB knowledge comes in handy.

Cisco Computers... | Answered on Mar 20, 2017


Configuration? What type of configuration / settings would you like to know? Anyhow , just use the link below and it will redirect you to the page of your Cisco Service Manual, where you can see the complete image instruction /setup / configuration of your cisco wap4410N

http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf

I am sorry , for the answer that I provided . Since I dont have an idea for the configuration that you needed much better if your going to use the link that provided because its very helpful thanks

Cisco Computers... | Answered on Feb 05, 2017


Cisco doesnt have any file aside from the ISO file that you can download on their website .

2 ways to download and install the driver

1 Download and install an ISO converter software and use or click the link for the driver software

https://software.cisco.com/download/release.html?mdfid=283862063&softwareid=283853158&release=3.0(2h)&relind=AVAILABLE&rellifecycle=&reltype=latest


and use this site to download and install the ISO converter https://www.crystalidea.com/zip-to-iso-converter-convert-zip-archives-to-iso

2. USE window update
Updating the Windows Driver

Perform the following steps to update the LSI MegaSR driver for Windows or to install this driver on an
existing system booted from a standard IDE drive


Step 1 Click Start, point to Settings, and then click Control Panel

Double-click System, click the Hardware tab, and then click Device Manager. Device Manager starts.
Step 2
In Device Manager, double-click SCSI and RAID Controllers, right-click the device for which you are
Step 3
installing the driver, and then click Properties.
On the Driver tab, click Update Driver to open the Update Device Driver wizard, and then follow the
Step 4
wizard instructions to update the driver

Cisco Computers... | Answered on Feb 05, 2017


user name cisco
password cisco

Cisco Computers... | Answered on Sep 25, 2016


What about it?

Cisco Computers... | Answered on Aug 02, 2016


Please describe the router and the lights that are blinking. It could just be activity lights.

Alternately you can look up your router and probably download the manual, which should explain what the lights are and what they indicate.

Cisco Computers... | Answered on Aug 02, 2016


On the back of the router is a reset button. Press that in for 5-10 seconds. It will reset to factory specs. Once you reset the Valet Hotspot, all of its customized settings (network name, wireless security, etc.) will be erased and the hotspot's IP address will be reverted back to 192.168.1.1, with a default password of admin and no username.

Cisco Computers... | Answered on Aug 02, 2016


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

Cisco Computers... | Answered on Apr 02, 2016


press **# in the menu to enable write mode.

Cisco Computers... | Answered on Sep 16, 2015


you have to contact your service provider

Cisco Computers... | Answered on Sep 03, 2015


you need to install sound drivers plus all the other drivers for your device, it is almost certain they are not installed if you have a bare windows installation only

Cisco Computers... | Answered on Jul 05, 2015


Huh? Punctuation will only help us understand what you're trying to do!

Cisco Computers... | Answered on Jun 17, 2015

Not finding what you are looking for?
Cisco Catalyst 4006 Chassis ( 4006) Logo

Popular Tags

17 questions posted

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Catalyst Cisco

  • Catalyst Cisco

Most Popular Question

50 port lan switch specification

  • Computers & Internet
Loading...