20 Most Recent Cisco Catalyst 4006 Chassis ( 4006) - Page 9 Questions & Answers


which model of router are you using?

Cisco Computers... | Answered on Aug 25, 2014


Usually slot one is connected to your router and then you can connect 4 other computers to the switch.

Cisco Computers... | Answered on Aug 21, 2014


Put in your operating system cd, if you have one and boot to it. Then you can repair the OS in question.

Cisco Computers... | Answered on Aug 21, 2014


Dhcp should be on. After enabling make sure that you are receiving an IP address from your Router. After that restart your TV and try to stream a movie from Netflix.

Cisco Computers... | Answered on Aug 06, 2014


There is one thing that you can do. Reset your router and enter the default password which came with your router. Usually username:admin password: admin. If that is not the default password, you can search the Google for your router's model default password. The biggest problem that you will have with this method is any custom configuration that you made on the router will be lost. Therefore you will need to rewrite them again.

Cisco Computers... | Answered on Aug 06, 2014


Reset the router to its "factory" settings (including the original ID/password).

Cisco Computers... | Answered on Jul 29, 2014


Unplug the network cables. Believe it or not the network data is electricity.

Cisco Computers... | Answered on Jul 28, 2014


Reset and reconfigure

Cisco Computers... | Answered on Jul 25, 2014


Integrity check value,
What is Integrity Check Value ICV

Cisco Computers... | Answered on Jul 23, 2014


This is usually a latency issue. Monitor your network and see what is killing the bandwith on the vlan your phone is on. It's tough to answer this without more information as the problem could be on your local physical network or somewhere outside of the demarc. It is wise to keep your voice network separated from your data network in order to optimize bandwidth for the phones.

Cisco Computers... | Answered on Jul 22, 2014


try here
http://www.cisco.com/web/consumer/support/modem_DPC2100.html
or
http://www.simplehelp.net/2006/07/17/cable-modem-troubleshooting-scientific-atlanta-dpc2100/

Cisco Computers... | Answered on Jul 15, 2014


It is easier to access the management interface and change the guest password there.

Cisco Computers... | Answered on Jul 09, 2014


If you have two SUP's this one will be in standby mode.

Cisco Computers... | Answered on Jun 20, 2014


Try looking in the router's "Applications and Gaming" section for something called "QOS", or Quality of Service. You probably need to make some adjustments in there to increase the bandwidth assigned to your VOIP device/service.

Cisco Computers... | Answered on Jun 02, 2014


I'm guessing this has something to do with "NAT" being restricted. It's complicated, and you'll have to open up some ports to your PS/3's LAN IP address. I suggest you search a bit on google and find one with photos that you can follow step by step.

Cisco Computers... | Answered on Jun 02, 2014


It's likely to be found on their website http://www.cisco.com/

Cisco Computers... | Answered on Jun 01, 2014


This may be a problem from something other than the router. The site may be rejecting your device that you're using. Try using a different device and get back with me if you still encounter problems. Thanks and god bless.

Cisco Computers... | Answered on Jun 01, 2014

Not finding what you are looking for?
Cisco Catalyst 4006 Chassis ( 4006) Logo

Popular Tags

17 questions posted

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Catalyst Cisco

  • Catalyst Cisco

Most Popular Question

50 port lan switch specification

  • Computers & Internet
Loading...