20 Most Recent BenQ DC3400 Digital Camera Questions & Answers


Read ur manual or look online or go to a retailer

BenQ DC3400... | Answered on Jul 21, 2014


Check in this SITE or call toll-free 1-888-966-2299 or e-mail sales@batterycanada.com if you don't see your BenQ digital camera model listed.

Hope helps (remember to rate this answer).

BenQ DC3400... | Answered on Jan 11, 2011


Hi,

You can use normal SD cards up to 1 GB in size.

BenQ DC3400... | Answered on Jan 25, 2009


my AC power Adepter for the Benq DC 3400 is damaged...

BenQ DC3400... | Answered on Dec 25, 2008


This modelnot charging good because i charge hole day but no more charging was happens. Flash is not ok some time oprate sometime not.

BenQ DC3400... | Answered on Dec 25, 2008


baterry can not be charging . I LIVE HYDERABAD IN INDIA

BenQ DC3400... | Answered on Dec 25, 2008


Benq ? ? ?
such a brand that no spares are available in market.


so, say no to Benq.

BenQ DC3400... | Answered on Jun 10, 2008


Go to the manufacture website. There should be either a download or a support section. Look there but have your model number for your camera ready.

BenQ DC3400... | Answered on Jun 10, 2008


it happend with me .
this camera was degined to use SD card by max 32 MB or may be less.unless there is a softwear to allow the cam to accept the bigger capicty like SD 1 or 2 GB

BenQ DC3400... | Answered on May 18, 2008


Hi Beshoui,
I believe your zoom lens is not extending when you power on. In most cases like this, there is likely a foreign body (sand) or similar objects lodged between the lens tubes or the camera has been subjected to a knock (dropped, bumped against a solid surface) that caused the lens tube to miss-align. All you need to do is:
1. as you switch on the camera, give a little knock/ tapping with your fingers around the lens.
2. if that fails, apply a little pressure to the sides of the lens ring while powering on your camera.

Lets hope that will help to dislodge the foreign body or the lens tube miss-alignment.

BenQ Cameras | Answered on Feb 08, 2016


Please.
When an electronic device is start acting strange, a software update is the worst thing you can try to solve the problem.

Updates are only allowed if the system is working without an error.
If it is not working correct, you can't be sure it will load the update correct and you never know what happens when the update is started.
For every update there is a condition, the electronic needs to work perfect and the battery / power supply must be capable of delivering enough power during the whole update process.
I'm sure there will be no update for the Benq camera.

BenQ Cameras | Answered on Jul 27, 2014

Not finding what you are looking for?
BenQ DC3400 Digital Camera Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top BenQ Cameras Experts

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers

scramblepad
scramblepad

Level 2 Expert

68 Answers

ChinthakaJ
ChinthakaJ

Level 3 Expert

646 Answers

Are you a BenQ Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

BenQ Cameras

  • BenQ Cameras

Most Popular Question

need driver cam

  • Cameras
Loading...