20 Most Recent
Questions & Answers
VZW USB760 not being detected by laptop.
i had the same problem. the only way the computer recognizes the 760 is from a fresh re-boot. a few tricks from tech support.
when shutting down, first disconnect, then power off modem from the VZW software. the next time you plug it in the computer then recognize the modum.
a different problem is the signal strength. my old 720 had a much stronger signal in the same location and a faster connect speed. any ideas?
3Com 8054 /...
on Sep 16, 2009
I have a USR 8054 and I cannot access on the
Not true you do not need orginal password..you need to perform a hard reset.. somewhere on the back of router should be a little pinhole with a reset button underneath..take a paper clip or similar and put it in the pinhole and push down the button in there for a FULL 30 seconds..let it reboot and you should be able to access, it might show as a different name on your pc because you wiped out all the info that was on it
3Com 8054 /...
on Apr 29, 2009
I have two 3com
I don't know anything about these units, nor do I have time to source any docs for you, but maybe you can try connecting a PC directly to the port your patch panel is connecting the the switch from, you can at least see if that port is working.
My next and only other suggestion is to invest in a "LAN cable tester". In my area, you can find cheap ones for U$20.
The tester will allow you to check connectivity between any two ports, and allows you to test both patch links and individual CAT5/6 cables.
3Com Computers &...
on Nov 22, 2017
Not finding what you are looking for?