20 Most Recent IBM eServer xSeries x226 Questions & Answers

try to see if the processor is overheating, try to clean it and put a bit of thermal paste

IBM eServer... | Answered on Nov 18, 2017

Format the drive that has the operating system on it. None of the programs on it will work once it has windows 7 or 8 on it. Server software IS different even though it may have the same name. Now, the tough part. Before you format, get the motherboard model number off it. It's sill screened somewhere on the board. Next go the the BOARD manufacturer's web site to get the drivers needed for windows. Next , do the same for all the devices you have connected such as CD rom drives, mouse, keyboard , modem, network card, video card, These drivers are needed to replace the server drivers with PC drivers. After you have gathered up all the new drivers, format the hard drive and install windows. You'll soon find out which drivers are necessary. Install them as needed. You will have to buy PC versions of the software programs you need and then install them as well. That should get you going.

IBM eServer... | Answered on May 25, 2015

See Hardware Maintenance Manual and Troubleshooting Guide - Chapter 6, page 113:


IBM eServer... | Answered on Apr 09, 2015

You can open up the side cover to ensure that if the speaker jack is porperly plugged in or not because it sometime happen because of taking anything apart.

IBM eServer... | Answered on Oct 23, 2013

Sounds like an overheat issue or ram issue. Look up the beep codes if there are any

IBM eServer... | Answered on Aug 07, 2012


Most of the time this is a memory error code. Have you added new memory cards? Sometime the cards are not seated well, are the incorrect placement (cards need to be in pairs)

Check that and post your results. Good Luck.


IBM eServer... | Answered on Nov 24, 2011


This is a hardware compatibility issue. (Most times) when installing server 2003 and it keeps dumping memory. Check to make sure your system is the correct configuration for the Windows Server 2003.

Good Luck .

IBM eServer... | Answered on Nov 09, 2011

either your moitor went out ? or your video card? try hooking it up to a monitor that you know that works, if it boots up you need a monitor ! if it doesn't then you need a video card ! hope this helps !

IBM eServer... | Answered on Jun 03, 2011

Beep codes vary with different manufacturers. The following link will tell you more about the meaning(of 2-2-1):


IBM eServer... | Answered on Jun 02, 2011

Short the BIOS or remove the internal battery and replace after a couple of min and set everything in BIOS settings to default............sodeep

IBM eServer... | Answered on Nov 11, 2010

online payment Gateway Integration, Erp Software Development, Integration of website, Maintenances of Software, HMS, DMS, Bulk Emailer, Bulk Rss Feed Submitter Software and many more Erp Product on er.amish@gmail.com or visit my website :http://java2all.wordpress.com/software-products/

IBM eServer... | Answered on Apr 03, 2010

When your system boots up you should see an option to access your raid controller if not or if your system doesn't see the controller at all you will have to download the utility software from IBM, but you need to be careful any change you make in the configuration of the disks will delete all data on your drives. This is non-recoverable loss. The utility has help and is fairly easy to understand.

IBM eServer... | Answered on Mar 24, 2009

Not finding what you are looking for?
IBM eServer xSeries x226 Logo

Popular Tags

31 questions posted

Ask a Question

Usually answered in minutes!

Top IBM Computers & Internet Experts


Level 3 Expert

13434 Answers

Alun Cox

Level 3 Expert

2679 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you an IBM Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

xSeries IBM

  • xSeries IBM

Most Popular Question

2 2 1 beepcode ibm x226

  • Computers & Internet