20 Most Recent Casio KL-60 label maker Questions & Answers


Hello, If you can't get it to work, try to do a factory reset.
Turn the unit off, then Hold the PRINT and ESC key down and then Press the power button. KEEP HOLDING THE Print and Esc key down for 2 seconds and then release both of them. You should see a message in the display INT?, Press SET to Reset your printer, or Esc to cancel.
Hope this helps.
Best wishes
Mac =)

Casio KL-60... | Answered on Mar 13, 2014


Hi, If you can't get it to work, try to do a factory reset.
Turn the unit off, then Hold the PRINT and ESC key down and then Press the power button. KEEP HOLDING THE Print and Esc key down for 2 seconds and then release both of them. You should see a message in the display INT?, Press SET to Reset your printer, or Esc to cancel.
Hope this helps.
Mac =)

Casio KL-60... | Answered on Mar 13, 2014


What is the error you get ?

Casio KL-60... | Answered on Oct 25, 2013


I dont believe there is a grand total on that machine.

http://support.casio.com/en/manual/manualfile.php?cid=004005001

Casio Office... | Answered on Dec 06, 2019


https://www.calculatorsoup.com/calculators/conversions/convert-decimal-degrees-to-degrees-minutes-seconds.php

Casio Office... | Answered on Oct 31, 2019


Parts not available, Try buying a used one on ebay

Casio Office... | Answered on Oct 28, 2019


Seems to be a common problem on this otherwise great calculator that helped me through both high school and university. I've had mine for nearly 20 years and this problem showed up a few years ago. But I remember classmates reported the same problem when it was almost new.

If replacing batteries isn't helping, the problem is most likely caused by oxidation on the springs connecting the battery holder to the main PCB. The solution is as follows:

1. Remove the metal back cover (2 screws)
2. Remove the plastic back lid by removing the black screws (leave the batteries mounted) and CAREFULLY slide the back lid to the lower end (where the EXE button is located). Do not lift while sliding until the lid easily comes off.
3. On the back side of the plastic lid, very carefully bend the the two metal connectors ~1 mm on both batteryholders to increase their tension.
4. Clean the connecting pads on the PCB and the metal springs with de-oxidizer solvent.
5. Re-assemble and your 4500P calculator should be good as new.

Casio Office... | Answered on Sep 12, 2019

Not finding what you are looking for?
Casio KL-60 label maker Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Casio Office Equipment & Supplies Experts

k24674

Level 3 Expert

8081 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Casio Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Casio Office Equipment & Supplies

  • Casio Office Equipment & Supplies

Most Popular Question

get manual download misplaced manual

  • Office Equipment & Supplies
Loading...