20 Most Recent Dell PowerEdge 1600SC Server Questions & Answers


Not sure what "the drive forks" actually means.

The floppy drive usually connects via a dedicated connector on the motherboard by a ribbon cable similar to the IDE cables but physically smaller and of course to the power supply. If the drive, the cable and the motherboard is ok it should appear in the bios list ready to be enabled and added to the boot order.

If the floppy drive doesn't appear in the list you should refer to the motherboard manual as there might be some jumpers to reset or perhaps it is only suitable for a usb floppy drive.

Take the number from the motherboard and do an internet search which should direct you to a place where you can download a manual which will contain all the information you need.

Dell PowerEdge... | Answered on Nov 11, 2017


If you are using an image made from the IBM and it has a different processor and the board specs are different that can cause the drive not to boot it will act like it is then go into a perpetual boot. I would try to re image it again to insure that is ok on the drive also check the board If one is and AMD and the other an Intel then that would be part of the problem.

Dell PowerEdge... | Answered on Nov 02, 2017


Get creative.

This is not a tech support question.

This should be considered as "Closed."

Dell PowerEdge... | Answered on Jun 13, 2015


The lock on the Powerledge is not too difficult to pick. A home made pick or buy a small lock picking tool set (less than $20). Without any training you can pick it in five minutes.

Dell PowerEdge... | Answered on Aug 13, 2014


Go to Microsoft for drivers.

Dell PowerEdge... | Answered on Mar 19, 2014


Yes Doug. What is your problem with your Scsi controller device?

Dell PowerEdge... | Answered on Feb 01, 2014


Bios too old and the 32 Bit system is inadequate to manage the function desired.

Dell PowerEdge... | Answered on Jan 29, 2014


It seems to be DRAM refresh error. Kindly unplug the RAM and plug it back.

Regards,
Kaushik Patel

Dell PowerEdge... | Answered on Nov 07, 2013


I guess you can't go into start button. /anyway how did you know if computing is powered? On your keyboard top line keys have screen control keys for brightness etc.eg f4. try.

Dell PowerEdge... | Answered on Aug 03, 2013


You can do that by doing the jumper settings procedure, you can find the steps from the user manual of your unit

Dell PowerEdge... | Answered on Apr 07, 2013


Re-seat it, If still failed, replace it.

Dell PowerEdge... | Answered on Mar 28, 2013


create a wipe disc from the internet or just install OS, When new OS is installing, before it does it automatically formats the hdd

Dell PowerEdge... | Answered on Jan 25, 2013


Hello here is the homepage.

http://www.dell.com/support/drivers/us/en/ussoho1/Product/poweredge-1600sc

There should at least be a message on the monitor indicating there is no signal coming to the monitor. The first thought that comes to mind if all is connected would be that the power supply has failed.
And maybe the graphic card.

Call also the DELL support in your country they will be glad to help
and they probably know the fault.

Contact Us 1-877-671-3355

Good luck

Dell PowerEdge... | Answered on Nov 26, 2012

Not finding what you are looking for?
Dell PowerEdge 1600SC Server Logo

117 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PowerEdge Dell

  • PowerEdge Dell

Most Popular Question

server show system memory

  • Computers & Internet
Loading...