20 Most Recent Canon imageCLASS C2100 Laser Printer Questions & Answers


The solution is on page 10-34 of the service manual:

http://printer1.blogspot.com/2008/03/canon-cp660-service-manual.html

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Canon imageCLASS... | Answered on Feb 05, 2011


www.fastrepairguide.com/printer.../hp-laserjet-printer-error-code.html

Canon imageCLASS... | Answered on Aug 03, 2010


This is the fuser. You just need to get a fuser maintenance kit. The drum and fuser are both considered consumable parts, as well as the rollers. Thus the "maintenance" kits. Fuser maintenance kits are around 200-300. Once in a blue moon you can find them on ebay for around 90.

Canon imageCLASS... | Answered on Mar 09, 2010


I just ran into this issue in teh last couple days. I went back and found a note from someone who owend it previously with instructions on how to clear this.

Press the menu button until you see the "reset". Press enter. On the screen when you see "Clear log/Queses" change the no to a yes with the arrow keys. Press enter and wait a few seconds. Press cancel and the machine will reboot and the hard disk will have been emptied.

Canon imageCLASS... | Answered on Mar 04, 2010


problem with cartridge itself....

Canon imageCLASS... | Answered on Oct 05, 2009


Maje sure tyhat the corona wire is clean (use a dry bristle haired artists paint brush or use the cleaning pad supplied with the printer) and making sure that the toner cart cleaner / scraper is not clogged or has some paper jammed on it. Also you can vacuum the Corona Wire with a domestic vac and the nozzle tool or a clean soft brush tool but make sure the printer is turned off before doing it.

Canon imageCLASS... | Answered on Aug 30, 2009


here you go...this printer model is known as cp660 on other regions (based on their Web site).

http://printer1.blogspot.com/2008/03/canon-cp660-service-manual.html

hope this helps.

Canon imageCLASS... | Answered on Jun 24, 2009


It sounds like the default tray it's expecting to pull paper from is out of paper.  Make sure the trays have paper, and that it isn't jammed.

Canon imageCLASS... | Answered on Nov 06, 2008


I believe that is a dirty sensor error message.


E021. Transfer Belt Cleaner Contanct/ Rease Problem.
Cleaner pressure flapper solenoid, Belt cleaner detect sensor, engine PCB.

Canon imageCLASS... | Answered on Feb 23, 2008


I guess youve tried switching it off and on?
If so It needs its system software reloading. Only Canon reps can get hold of this, best to get someone locally.

Canon imageCLASS... | Answered on Nov 17, 2019


SIR,
THIS IS BRIJESH JAYSWAL
I HAVE CANON MF 4320D MODEL,
AND ERROR COMES " SYSTEM ERROR E000 "
PLEASE RESOLVE THIS ERROR

Canon imageCLASS... | Answered on Sep 14, 2019


1) The error E808 occurs when one of the connectors in the fixing assembly is not properly plugged in when the unit is on.

2) This might have occurred while replacing the fixing assembly or performing a troubleshooting attempt on the machine.

3) You can find the connector above the fixing assembly at the right corner, behind the cover on the machine's side.

4) To clear the E808 error, unplug the machine from the power supply for at least 10 minutes. The error will appear again if the thermistors are in bad condition.

5)The fixing film assembly should be replaced in such case.

For more printer related assistance get in touch with our experts by just giving a call @ 1-866-293-9220.

Canon imageCLASS... | Answered on Jul 06, 2019


if you want the DEFATUL IP ADDRES JUST RESET THE PRINTER AND CONNECT THE PRINTER WITH COMPUTER AND SCAN THE PRINTER WITH ADVANCED IP SCANNER SOFTEWARE

Canon imageCLASS... | Answered on May 20, 2019


imageclass mf 4412 e 202-0002

Canon imageCLASS... | Answered on Apr 29, 2019


The fixing film unit is faulty (i.e., the main thermistor TH1 has poor contact, or the fixing heater is faulty). The main power supply PCB is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>FCLEAR>ERR.

Canon imageCLASS... | Answered on Apr 14, 2019

Not finding what you are looking for?
Canon imageCLASS C2100 Laser Printer Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2261 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

imageCLASS Canon

  • imageCLASS Canon

Most Popular Question

canon laserjet printer

  • Office Equipment & Supplies
Loading...