20 Most Recent Zanussi ZJD1219 Front Load Washer / Dryer Questions & Answers


Hello
The e36 is a faulty pressure switch in the senscing circut.

Your going to need service on the machine.

Zanussi ZJD1219... | Answered on Sep 22, 2011


check pump filter

Zanussi ZJD1219... | Answered on Jan 26, 2011


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.



if you dryer is gas check out this gas no heat tip....



If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.



check out this electric no heat tip...


heatman101
///////////////

Zanussi ZJD1219... | Answered on Jan 15, 2011


This error code seems to be the control board detecting a wrong configuration (in other words, an illogical set of sensing conditions, from its connected sensors and wiring). It apparently can happen, when wires become badly contacting, or if contaminated with motor brush carbon (the horrible black powder that comes off the motor commutator and brushes), or corroded from other contaminants from the soap dispenser area. You should be able to check this, remove, clean and replace the contacts:
Take the top off the machine, (ENSURE IT IS UNPLUGGED) andon the right hand side of the machine, you should see a set of 4 blue wires that go from the electronics module to the front display unit. Take this plug off (it is held on by plastic retainers) clean with wd40, or silicone (Servisol) contact cleaner, then dry, replace, then try again. If it is very badly corroded or pitted, you may have to replace that part of the wiring and socket.
If it is not that, then the wiring to/from various other sensors could be damaged, or the control board could be faulty. It is probably worth checking around other plugs and sockets, re-seating each one in turn, that lead to the control board, before calling an engineer in, or getting a spare board, as they are expensive (£60 - £80). Pulling off and plugging back on (Re-seating) the plugs and sockets has the effect of cleaning the contacts, and may fix certain intermittent faults like this. Obviously check for any plugs/sockets that appear burnt, corroded, or discoloured compared with the others, and clean the contacts with emery or a needle file. Hope this helped

Zanussi ZJD1219... | Answered on Dec 28, 2010


Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check out this electric no heat tip...

heatman101
7676

Zanussi ZJD1219... | Answered on Sep 30, 2010


Hi,
E20 is a draining error.
Check the filter.You need to take the filter out, empty it of all lint and replace it. It may have water trapped in already, so get a cloth ready to soak up excess liquid! Also, make sure when you put it back in you have tightened it enough to avoid leaking but not too much that you cannot get it back out.

If still the problem persists then the problem is with the draining pump.The pump is not pumping out the water.Check the pump impeller it may got stuck due to some obstacles.Replace it and this wont come again.

Zanussi ZJD1219... | Answered on Sep 16, 2010


there must be low water pressure please rate my answer thank you : )

Zanussi ZJD1219... | Answered on Aug 19, 2010


this is a problem that can only be solved by a professional so please get your local repairman on the line and have him come and take a look.

Zanussi ZJD1219... | Answered on Jun 11, 2010


Problem for Zanussi ZJD1219 Front Load All-in-One Washer / Dryer How do i change the main bearing please?

Zanussi ZJD1219... | Answered on Feb 11, 2010

Not finding what you are looking for?
Zanussi ZJD1219 Front Load Washer / Dryer Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Zanussi Washing Machines

  • Zanussi Washing Machines

Most Popular Question

error e20 keeps coming

  • Washing Machines
Loading...