20 Most Recent Kenmore HE2 Plus 3.6 cu. ft. Super Capacity Front Load Washer Questions & Answers


chjeck the pump for any blogg

Kenmore HE2 Plus... | Answered on Jun 05, 2014


If the door lock is engaging, then there could be a few things causing the problem. These things are as follows:
1) The water valve is bad - you can check this by seeing if when you turn the machine on if power, 115vac is being applied to it. If so the valve is bad, if not read forward.
2) There is a part called the pressure switch, it controls the amount of water that flows into the machine. Its connected to the drum by a 1/4" tubing. You'll need to check to make sure that nothing is obstructing the tube.
3) Take the bottom of the machine off, called the kick plate. Inside there is a tech sheet with diagnostic walk through's that will carry you the rest of the way

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Kenmore HE2 Plus... | Answered on Jun 18, 2012


IF you take the panel off the is below the door, there is a drain plug and you should take it out. YOU will get lots of WATER. Be ready. Clean this out and try again. The issue is most likely the water solenoid valve is bad or the board that controls it is bad. You can also find the tech sheet when you look for the drain. It has all the tests that you can run.

Kenmore HE2... | Answered on May 17, 2019


There are two control boards (parts 3 and 6) shown here: http://www.searspartsdirect.com/model-number/11047571601/0582/0153200.html . Make sure to look at the Control Panel diagram. Part 3 is http://www.searspartsdirect.com/part-number/8540490/0026/110.html?modelNumber=11047571601&categoryName=Residential%20Washers&brandName=KENMORE . Part 6 is http://www.searspartsdirect.com/part-number/W10022320/0026/110.html?modelNumber=11047571601&categoryName=Residential%20Washers&brandName=KENMORE . With these part numbers, you should be able to find them online. They will be listed as Whirlpool or Whirlpool OEM parts.

If you add a comment with the problem that led you to have a technician look at the washer, I will confirm which board is which. I suspect part 6 is the B board but I'm not certain of that.

I hope this helps.

Cindy Wells

Kenmore HE2... | Answered on Apr 20, 2017


unplug--see if it resets--if not--the control box is bad--about 300 for the part

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/david_2f6e03df6c124197

Kenmore HE2... | Answered on Jan 13, 2015

Not finding what you are looking for?
Kenmore HE2 Plus 3.6 cu. ft. Super Capacity Front Load Washer Logo

Popular Tags

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HE2 Kenmore

  • HE2 Kenmore

Most Popular Question

kenmore front loader washer powers but

  • Washing Machines
Loading...