20 Most Recent HP LaserJet 4250dtn Printer Questions & Answers

1 Turn the printer off and then on.
2 Reconnect the connector between the air-temperature sensor (the bar mounted across the main cooling fan
on the left side of the printer) and the power supply.
3 Replace the air-temperature sensor.
4 Replace the power-supply assembly.

HP LaserJet... | Answered on May 15, 2019

The tray 2 lifter-motor is not functioning.

1 Turn the printer off and then on.
2 If the error persists, turn the printer off.
3 Verify that the tray 2 lifter wire-harness
is full seated in its connector on the
dc controller PCA (location J93).
4 Replace the tray 2 lifter-driver
assembly. See Tray 2 lifter-drive
5 Replace the dc controller PCA. See
Dc controller PCA.

HP LaserJet... | Answered on Feb 06, 2019

http://304522.pdf/ This is a motor lifter error for tray 2. Most times the issue is caused by a small spring which comes off the motor or the chasis where it attaches. See the attached page and look at item 3 as that is the spring. If it is ok, then you could try loosening the screw which secures the motor and then tighening it again. Do so with the tray removed.

HP LaserJet... | Answered on Feb 06, 2019

Change the cartridge

HP LaserJet... | Answered on Oct 02, 2017

Click Here! then choose your operating system, then choose the type of driver you want, hp recommends a pcl 5 or 5e as opposed to 6 or higher due to the stability of the lower version, less buggy... if this helps please mark as a fixya...

HP LaserJet... | Answered on Nov 24, 2013

This is a great "little" printer. If you can provide the number and exact wording on the display panel of the printer, we can solve this. It is possible you don't have enough memory in the printer to process the image. You can order more from HP.COM.

HP LaserJet... | Answered on Aug 22, 2013

8568e469-5614-4f4b-85d3-8836768de9b4.jpgThat error indicates a problem with the fuser in the printer. You will need to replace the fuser assembly to correct the error. Here is the information from the service manual regarding that error.

HP LaserJet... | Answered on Aug 15, 2013


It sounds like the paper pickup roller and separation pad for tray 1 is worn and will need to be replaced. These two parts pickup the paper and weed the pages into the printer. When they get worn down they can grab more than one page at a time. The parts are user replaceable, no need to pay a big repair bill for something like this. The parts come in a kit with rollers and pads for tray 1 and tray 2 along with the instructions and it is available here:
Here is a picture of the roller and separation pad from the service manual.

I hope this helps you out.

HP LaserJet... | Answered on Apr 11, 2013

Not finding what you are looking for?
HP LaserJet 4250dtn Printer Logo

92 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LaserJet HP

  • LaserJet HP

Most Popular Question

error 49 4c02 comes up whenever

  • Office Equipment & Supplies