20 Most Recent Jandy Aqualink RS6 Pool Only/Spa Only Control System Questions & Answers


check 4 pin red plug if plugged in see if wires cut

Jandy Aqualink... | Answered on Apr 29, 2016


check red 4 pin connectors to see if any wires touching if not make sure wires are tight also make sure wire isnt cut or knicked sometimes landscapers do it not knowing seems like shorted wire if you can take controller with shorter wire and try next to aqualink if it works bad wire if not bad controller

Jandy Aqualink... | Answered on May 28, 2015


check 4 pin connectors see if shorted or see if wires cut

Jandy Aqualink... | Answered on May 02, 2015


check under top there should be a flue fusible link possibly blown that's to safety circuit if blown unit possibly overheating check gas pressure or burn tubes for blockage

Jandy Pool & Spa | Answered on Sep 15, 2019


One of your actuators more likely the suction side is bad or the toggle switch on the bottom or side of the actuator is in the off position.

Jandy Pool & Spa | Answered on Jun 17, 2019


It is very likely that your exhaust Fuselink is faulty. There are two types of fuselink used on the LXI, commonly called the upper (exhaust) high temp and the lower (combustion intake) low temp. Make sure you purchase the correct part for the right location and ALWAYS turn off the power to the heater when changing the sensor.

Jandy Pool & Spa | Answered on Jun 12, 2019


https://www.jandy.com/-/media/zodiac/global/downloads/h/h0208700g.pdf
This is a highly complex computer controlled device. Please, refer to the above site for a copy of the installation and start up procedures. Normal operation is on page 20. https://www.jandy.com/-/media/zodiac/global/downloads/l/l0858.pdf
Please, refer to this website for detailed trouble shooting procedures, or contact a trained service technician for assistance.
He will have the tools, training, and talent to repair this device.

Jandy Pool & Spa | Answered on May 24, 2019


check safety circuit

Jandy Pool & Spa | Answered on May 08, 2019

Not finding what you are looking for?
Jandy Aqualink RS6 Pool Only/Spa Only Control System Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Jandy Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

10627 Answers

Bill Jordan

Level 2 Expert

375 Answers

Steve Slater

Level 2 Expert

72 Answers

Are you a Jandy Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jandy Pool & Spa

  • Jandy Pool & Spa

Most Popular Question

led display backlit but display blank

  • Pool & Spa
Loading...