20 Most Recent KDS Radius RAD-7 17" Flat Panel LCD Monitor Questions & Answers


I agree that the overheat was the supply being too small. Not only the voltage rating is wrong, but I'd bet the amperage is alsotoo low for correct operation. Check this link. I have bought power bricks from them for laptops, monitors, and power tools - all good quality without breaking the bank. They ship pretty quickly as well. http://generalsaving.com/productfile/G_LCD12V3A/1000/G_LCD12V3A_z_0157.php

KDS Radius RAD-7... | Answered on Jun 08, 2017


First make sure you have the monitor cables correct. Try another monitor hopefully works so you can go into your device manager and make sure the right drivers are loaded and that your monitor is listed. You may do some research because I'm not sure but I think your monitor uses a back light & an inverter which is replaceable and not usually a difficult job or to expensive. Labor of coarse cost more than the parts. Monitors use a video card or on board video so make sure these are not the problem.
Are you sure its not in wake mode in the bios?
If you shine a light on the monitor when the comp. is on and the monitor light is on you may be able to see your screen. That would be the back light.
When if all and what was going on when it stopped working?

KDS Radius RAD-7... | Answered on Jan 03, 2015


Hi u can find it vasai (W), mumbai, India. available it. ( If it serial adapter ) sadguru computer system

KDS Radius RAD-7... | Answered on Dec 26, 2013


try to use another monitor power cord if is can turn on, otherwise immediately contact your monitor manufacturer to repair such device since it was struck by lightning

KDS Radius RAD-7... | Answered on May 25, 2012


It looks like a screw close to the vga. It is hard to get to

KDS Radius RAD-7... | Answered on Jun 18, 2011


6A is OK, HIGHER CURRENT is OK but not higher voltage, the main key is that the pwoer supply MUST be REGULATED power supply. Does it say that on the universal power supply that you have?

Basic LCD monitor and LCD TV troubleshooting guides:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
Failed LCD monitors, LCD TV's pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

KDS Radius RAD-7... | Answered on Dec 20, 2010


Yes, the has been a rash of bad capacitors installed on everything from mothersboards on on down.
If the top of the cap is puffed or there is electrolyte leaking it needs to be replaced.

KDS Radius RAD-7... | Answered on Nov 25, 2010


Check the caps and voltages in the power supply (you should have +5vdc (for logic) and +12~18vdc (for back lights).
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply, blown fuses, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

KDS Radius RAD-7... | Answered on May 28, 2010


Open up the back of the monitor and check the power supply board for any bad capacitors, if you see any that are leaking or slightly domed at the top they need to replaced.

When replacing capacitors check the type of cap you are dealing with, if they are barrel shape they are normally electrolytic and need to go into the board the right way, the caps are normally marked with a (-) sign going down along one side which is the negative leg of the componant.

Also check the voltage rating and farrads marked as a upside down (U) so if the cap is 47 micro farrad then it needs to be replaced with the same value. The voltage differs, you dont have to have exactly the same voltage as long as it is more or the same than stated on the side of the cap, if you do use a lower voltage cap it will explode.

KDS Radius RAD-7... | Answered on Jan 20, 2010


Hello,

Yes, you an use a 5 amp power supply on the monitor. If you need one we carry them on our site at:
HTML clipboard www.ccl-la.com

I hope this helps you, if so please rate our solution.

Buddy
Corporate Computer
HTML clipboard www.ccl-la.com

KDS Radius RAD-7... | Answered on Jan 01, 2010


Try changing the connecting cable. You seem to be connecting it with a composite cable which might have loose pins.

KDS Radius RAD-7... | Answered on Sep 15, 2009


Try this. Worked for me immediately, including with PhotoShop

  1. Go to Color Management (in Vista, just click the Windows Orb / Start Search & type in Color Management)
  2. On Devices, select your display (repeat if you have multiple ones... at least I did). e.g., Syncmaster ....
  3. Check the box: Use my settings for this device
  4. Select any and all profiles you have and Remove them.
Check to see if that fixed it. You may need to restart. I didn't have to.

more info, and where I learned about it here:
http://www.mydigitallife.info/2007/07/11/windows-vista-photo-gallery-yellow-tint-background-problem/comment-page-2/
http://www.walkernews.net/2008/07/15/how-to-fix-windows-photo-gallery-yellow-tint-and-photoshop-monitor-profile-problem/

KDS Radius RAD-7... | Answered on Sep 04, 2009


Hello,

You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is caused by parts called capacitors overheating in the confined space of he monitor. If you are good at electronics repair/soldering you can usually fix he problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htmYou can take the back cover off your monitor and look for the bad parts,replace any that look like the pictues and your monitor should work fine. The capacitors do need to be installed with the correct + and -connections, note the stripe on the old one and insert the new one the same way. If you don't want to try the repair yourself we offer a repair service for $35 plus shipping. I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

KDS Radius RAD-7... | Answered on Jul 03, 2009


Which Operating System you are using? If it's related to OS, it can be solved. If it's related to monitor h/w, you need to get it repaired by some technician.

KDS Radius RAD-7... | Answered on Jun 11, 2009

Not finding what you are looking for?
KDS Radius RAD-7 17" Flat Panel LCD Monitor Logo

Popular Tags

37 questions posted

Ask a Question

Usually answered in minutes!

Top KDS Computers & Internet Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Siul Oyaratgam

Level 2 Expert

317 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a KDS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Radius KDS

  • Radius KDS

Most Popular Question

screen went black

  • Computers & Internet
Loading...