Top 20 Brother MFC-3240C All-In-One InkJet Printer Questions & Answers


Not sure what 82 code is but A2 and A1 have to do with size of paper possible original to long for size of paper in cassette

Brother... | 446 views | 0 helpful votes


hi, i normally do not work on ink jets anymore. this may be simple. find the "menu" button push "menu"then "0" then "0" it should show you a language list select your language. push "ok"..done

Brother... | 147 views | 0 helpful votes


try cleaning the primary feed rollers with 99% alcohol. make sure mahine is unplugged and the rollers are dry prior to repluggin it in.

Brother... | 69 views | 0 helpful votes


Here it is. I hope it helps.

807355f7-c123-4f8f-afdb-cd9763c4f7f6.png

Brother... | 387 views | 0 helpful votes


Hi Jason, 5A is usually caused by a bad maintenance unit. The purge cam gear may be broken or too much load on the maintenance unit. Either way replacing maintenance unit should solve the problem.

Brother... | 1,483 views | 1 helpful votes


One of the reasons why such error flashes is because the paper or media your are using might not be suitable for the printer. Always check on your paper preference before printing.

Brother... | 85 views | 0 helpful votes


Even though you believe ink is still in the cartridge, your printer may not be able to sense this ink and may erroneously report that the cartridge is spent. If you receive this warning, remove the cartridge, turn off the printer and unplug it from the electricity. Wait 10 minutes. Restore the power and reinstall the cartridge as if it were brand-new. In many cases, the last bit of ink can be accessed after all--at least enough to produce a few more pages before the warning reappears.


Brother... | 21 views | 0 helpful votes


actually you cannot print it without the color ink installed

Brother... | 400 views | 1 helpful votes


nope!!

Brother... | 50 views | 2 helpful votes


if you can see the mark X in black ink then you have to replace it..it cause the printer not to print even its not totally empty...

Brother... | 38 views | 0 helpful votes


In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken . Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts. Sometimes the power supply unit must be checked as a poor SMPS unit can deliver low voltage and cause issues to the printer function. Check all the leads and connections of the mother board , the tags to the ink cartridge. Also check the mechanical settings of the ink cartridge , if jammed or tight remove motor and manually free the drive before it is set back.

Brother... | 40 views | 0 helpful votes


This printer connects via USB cable and not thru a parallel printer cable. The USB connector is actually inside the machine. Here is a small image of where the connector is and a link to the quick start guide.
galgoz_6.jpg

here is a link to the entire document
http://www.brother-usa.com/ModelDocuments/Consumer/Quick%20Setup%20Guide/QSG_MFC_3240C_3340CN_EN_376.PDF

Brother... | 98 views | 0 helpful votes


On the back of the printer there should be a place to plug in at USB B cable. This is a square whole (check an image search for what USB B looks like). That cable then converts to a standard USB to plug into your computer.
Thumbs Up!

Brother... | 61 views | 0 helpful votes


Here you go:

http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=mfc3240c_all

Brother... | 27 views | 0 helpful votes

Not finding what you are looking for?
Brother MFC-3240C All-In-One InkJet Printer Logo

269 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Jim Keysor

Level 2 Expert

331 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MFC Brother

  • MFC Brother

Most Popular Question

unable clean error 5a already reset

  • Office Equipment & Supplies
Loading...