20 Most Recent Tomtom GO 700 GPS Receiver - Page 2 Questions & Answers


settings/user
delete and leave blank every page, just click done and restart

Tomtom GO 700... | Answered on Nov 06, 2013


To reset your TomTom device, do the following:
  1. Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.
  2. Remove the SD card
    If your device uses an SD card, remove it.
  3. Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. The reset button is a hole at the base/bottom of the device.
  4. Turn your device on.
    Press the On/off button for at least 5 seconds or more, until the GPS starts up. It may take a minute or two of holding it down.
  5. Insert the SD card
    If your device uses an SD card, insert the SD card.

Tomtom GO 700... | Answered on Oct 27, 2013


Try to do a "Boot" .... by pressing and holding down the ON/OFF button for 5 seconds (or a lot more) until the device powers on again. Yes, at times, it may take a minute or more ! of holding that button down.

Tomtom GO 700... | Answered on Oct 27, 2013


It may be likely that the TF (SD) card is not being read properly or has been damaged/corrupted.
Try to read that SD card on your computer (i.e. not using the GPS) ... and see if it works. And/or use the Properties - Tool - Check Disks tool to "recover/fix" the SD card (on your PC).

Tomtom GO 700... | Answered on Oct 27, 2013


hi,

thank you for using Fixya.com

click on this site you be directly connected to the manual including to solved your problem how to reset your unit geneal..

http://www.scribd.com/doc/249380/TomTomONE-Manual

hint go to page 39 of the page GENERAL Reset guide.

please don't forget to rate our answers.

Tomtom GO 700... | Answered on Jul 19, 2013


I solved this problem by finding an answer on the Tom Tom website. Using a paper clip end insert it on the reset button and press for at least 10 seconds. The reset button is difficult to find; it's located close to the connector at the base of the unit. It is an annoying problem as it happens without any rhyme or reason. I now carry a paper clip in the car!

Tomtom GO 700... | Answered on May 26, 2013


Posting with them is a good thing, they know their system better than anyone else...good luck.

Tomtom GO 700... | Answered on Oct 17, 2012


In Tom Tom One 3rd Edition - Go to Change Preferences > Safety Preferences > Uncheck >> Hide most menu options while driving > Done. This should work!

Tomtom GO 700... | Answered on Jul 02, 2012


Hello
Here is some more information for you to follow to guide you step my step. Device displays a white or red cross
If your navigation device displays a cross after you switch it on, it means that the TomTom application is not installed correctly.
Note: It is normal for the navigation device to show a cross while it is connected to the computer.

The solution depends on which TomTom software is used for updating. Check which software your navigation device uses for getting updates.
Devices using MyTomTom for updates
For navigation devices that use MyTomTom, reset your device.
Devices using TomTom HOME for updates
For navigation devices that use TomTom HOME, you can solve this problem by installing the latest application on your navigation device.Here is also a link that will help you more. This will answer all your questions Mike
http://www.tomtom.com/support/index.php?Language=1&query=red+cross&FID=1898

Tomtom GO 700... | Answered on Oct 05, 2011


write to me: service@gps.pol.pl I will try to help

Tomtom GO 700... | Answered on Sep 24, 2011


tom tnm go 4v00.710 wont start after charge

Tomtom GO 700... | Answered on Sep 16, 2011


I have exactly the same problem. Everything worked fine until I did a software upgrade. I have tried the reset suggestion but it has not fixed the problem. I have been told that a possible solution is to install the version of the OS that was there prior to the upgrade but I cannot find this anywhere

Tomtom GO 700... | Answered on Aug 13, 2011


Welcome to Fixya

Please follow this procedure. Go to change preferences, then to safety preferences, chose either enable safety lock or disable safety lock. Hit done then choose to turn off map display , never or above a certain speed or always. hit done.

Thank you for using Fixya!


If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Tomtom GO 700... | Answered on May 10, 2011

Not finding what you are looking for?
Tomtom GO 700 GPS Receiver Logo

295 questions posted

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

514 Answers

k24674

Level 3 Expert

8081 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GO Tomtom

  • GO Tomtom

Most Popular Question

flashcard not loading

  • GPS
Loading...