Tasco 750 Monocular Microscope - Answered Questions & Fixed issues


Amazon has used ones for about $25. New they are not worth that much more. They are designed more as a toy, then a real microscope.

Tasco 750... | Answered on Mar 12, 2019 | 259 views


contact tasco.
try ebay for a month (search various combinations of keywords). notify by email.
21.january.2015

Tasco 750... | Answered on Aug 23, 2015 | 654 views


Tasco 750... | Answered on Mar 06, 2011 | 110 views


You will need to focus in on the slide. There should be 2 1" diameter knobs on either side of the stand, and just to the rear. Those knobs control the height of the stage (where you slide sits). Slowly raise or lower while looking into the eyepiece. At some point something should be see, if the microscope is working properly.

Sometimes it is easiest to start with the lowest magnification. On the outside of the objective (little lenses hanging down that can be rotated) there should be some numbers written on them (usually 4, 10, 40). Those numbers reference your magnification. If you multiply that number by the eyepiece (10) magnification, you will get your total magnification, so start out with your 4x. It will give you the largest field of view, so it is great for finding whatever it is that you are looking for on your slide. It is also the easiest one to get focused. The higher you go in magnification, the smaller the field of view, thereby the more difficult it is focus in on your sample.

Tasco 750... | Answered on Sep 05, 2011 | 1,070 views


sometimes when a battery causes corrosion inside something, you can clean off the springs or contacts where the battery goes. if i can, when that stuff happens i use sandpaper or something like that to clean the contacts. you cant always get sandpaper where you need it though. just try to find something to like scrape stuff off if its on there

Tasco 750... | Answered on May 01, 2010 | 936 views


Hi,
I have a instruction book....I can photocopy it for you if you wish

Tasco 750... | Answered on Jul 04, 2013 | 1,851 views


Try Ebay--may have to buy the micro aswell but it won't cost much,have you tried the Tasco website in case a free d'load is avail?-kind regards martin r

Tasco 750... | Answered on Mar 27, 2009 | 1,138 views


You must detach the bottom cover of the base of the microscope by taking off the 4 or 5 screws that keep it attached. That should reveal the wiring to the socket and bulb base.

Tasco 750... | Answered on Dec 22, 2008 | 399 views


I found out that Tasco microscopes have been discontinued quite some time ago. A Company called Bushnell 1-800 423-3537 who gave me the number of ABO 305-859-2010 Tasco microscope 750X # 60750-0 call after 3pm. They do not have my manual but can answer questions or send a similar manual. I have to call back stiil hope this helps. Zoom

Tasco 750... | Answered on Mar 19, 2008 | 1,176 views


hello..

For the red colour partical your illumination angle should be 0 degree.
As per you exepirience you are getting red at low magnification and not getting at high magnification. at the higer magnification the light deviation you can apriciate more then lower.

try to adjust your light source focusing lenc at higher magnification so at the lower it will be more better,

for the further problem you can contect me any time,

regards.

INDRAVIJAY

Tasco 750... | Answered on Mar 10, 2008 | 148 views


sir,
Diffrent company having their own system for microscope arm balacing.

Tell me which one microscope you have.

Auxillary arm or microscpe body sloly come down ward.

tell me problem is consult with which part..

INDRAVIJAY

Tasco 750... | Answered on Mar 10, 2008 | 363 views


HELLO..

There is five part in microscope

1. Eye piece

2. Binocular tube

3.Objective

4. magnification changer or joom accembaley

5. illumination segment

Try to make it out which part is gives a effect to your vision.

as per my suggesition illumination asembely you just clean it first.

keep in touch

regards

INDRAVIJAY

Tasco 750... | Answered on May 19, 2013 | 239 views


image.php?productid=16148sir,your microscope tube with the eye piece is screw joint with microscope body. Rather part is friction fitted as well as there is a proper place to mount it.you can do the gluing but first of all be clear that part should be not a movebale part other wise you will have dificulty for fine focusing.
for the further quotation dont be hazitate,
INDRAVIJAY

Tasco 750... | Answered on Mar 10, 2008 | 125 views


$25 or $30 if it is in OK condition. maybe $50 if pristine

Tasco Science &... | Answered on Jun 26, 2017 | 2,275 views


Are you running the windows 8.1 updates? When you plug in the tasco it should search and find the driver!

Tasco Science &... | Answered on Dec 24, 2014 | 257 views


I have a manual for the M1200ZFC I'm willing to sell if you're looking to buy - you can contact me at calebd2 (at) gmail (dot) com

Tasco Science &... | Answered on Dec 24, 2013 | 194 views


Baking soda will nuetralize the chemicals, but will not clean the contacts sufficiently. You will have to use a fine grit emory cloth or knifeblade, or similar abrasive material, to scrape the compromised contacts, until you get to fresh, uncorroded metal underneath. This will usually restore the unit, and make it operational.
Also check that the switch is good for the light, since they can become oxidized also.
If you're good with a voltmeter, you can ohm out the wiring, or troubleshoot it to find the problem.
If it's a switch, it's usually a swivelling metal contact, so make sure it's clean and making a good connection.
Good luck, and hope this helps.

Tasco Science &... | Answered on Mar 25, 2011 | 262 views


Contact Tasco they may be able to help:

9200 Cody Overland Park, KS 66214

Tasco Science &... | Answered on Jan 24, 2011 | 534 views


Microscope bulbs can be hard to find at a local hardware or electrical store in you area. The best, and cheapest solution is to go to http://www/bulbtronics.com. You will need to know the specification of the bulb in you are to buy online, but if not, their customer service folks are very good at helping you determine what those specifications are, and what bulb you will need to purchase.

Tasco Science &... | Answered on Jan 01, 2011 | 282 views

Not finding what you are looking for?
Tasco 750 Monocular Microscope Logo

Popular Tags

32 questions posted

Ask a Question

Usually answered in minutes!

Top Tasco Science & Laboratory Experts

Ekse

Level 3 Expert

13434 Answers

 Brian Main
Brian Main

Level 3 Expert

469 Answers

 Mikey
Mikey

Level 3 Expert

5748 Answers

Are you a Tasco Science and Laboratory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...