20 Most Recent Protron PD-DVR100 DVD Recorder - Page 3 Questions & Answers


Maybe the laser lents are dirty or malfunction.
You can try clean it with a piece of cotton (laser lents is a eye as glass inside the DVD Writer ( palce where you place your CD)

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Protron... | Answered on Sep 19, 2011



  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Protron... | Answered on Aug 19, 2011



  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Protron... | Answered on Aug 19, 2011


I turned my off and let it reset itself

Protron... | Answered on Aug 17, 2011


I hope that you have found the codes by now, but if not, here are the codes we have, and also the steps to program that remote.

1. Hold down the clear AUX button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the DVD on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

685 is the only code we have for this brand.

Becki Barned
DISH Network Customer Service

Protron... | Answered on Aug 06, 2011


Hello,

first, check the buttons on the remote control, look out for pal/ntsc. If you don't find such on your remote control, then the only solution to this problem is as follows:

Disconnect the player from your TV, connect it to another TV and it should certainly have a picture. Go to setup, change it back to ntsc.

The present TV the player is connected to is not compatible with PAL. So the next available TV might be Pal enabled and it can be changed to ntsc in order to work with your TV again.

I hope you understand the above. If you don't, please let me know.

Regards.

Protron... | Answered on Jul 31, 2011


Hi my nameis Mike Houston of DISH Network and I see you want to connect your ProtronPD-DVR100 DVD to the DISH Network receiver. To connect you player to the DISHreceiver and depending on the receiver you have there are different ways toconnect the two. I will send a link to help with these steps and if you haveany questions or concerns please e-mail me at michael.houston@dishnetwork.com;http://www.dishnetwork.com/SupportSection/manuals. - Mike H.

Protron... | Answered on Jul 17, 2011


Hello

Antes de usar su nueva grabadora de DVD, usted tendr? que ajustar el reloj y, si se ha conectado un
se?al de televisi?n, explorar el espectro de la se?al para desactivar debilidad de los canales

Para ajustar el reloj:
1. Encienda la grabadora.
2. Pulse SETUP para entrar en el men? de configuraci?n.
3. Utilice y para seleccionar el reloj sub-men?
y pulse ENTER

4. Utilice y para seleccionar la fecha y pulse
ENTRAR.
5. Introduzca la fecha actual con el teclado.
Alternativamente, puede seleccionar cada d?gito
individualmente pulsando y, a continuaci?n,
modifica con el bot?n y.
6. Pulse ENTER para fijar la fecha

7. Utilice y para seleccionar Hora y pulse ENTER.
8. Introduzca la hora actual usando el teclado.
Alternativamente, puede seleccionar cada d?gito individualmente presionando y, a continuaci?n, ajuste por
pulsando y.
9. Pulse ENTER para ajustar la hora

Protron... | Answered on May 23, 2011


aqui

http://www.replacementremotes.com/Protron/Buy-PRTR001-DVD-Recorder-DVDR-Remote-Control.html

Protron... | Answered on May 11, 2011


Hola!

Se puede grabar en formato PAL o en NTSC - depende de lo que configuras por el menu.

Saludos,
Pelu.

Protron... | Answered on May 03, 2011


Hi Catherine - There are two possible reasons for this:

The first is that some DVD readers have a difficult time with some "home made" DVD discs, sometimes having problems with certain brands of media.

I think more likely in this case is that you are not FINALIZING the disc after recording it.

From the unit's user manual are the instructions for this:

mikeywaf_5.png


Good Luck and Thanks for using Fix Ya

Mikeywaf

Protron... | Answered on Mar 18, 2011


http://www.scribd.com/doc/27397475/PD-DVR100-Manual get the manual from there

Protron... | Answered on Mar 12, 2011


http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=8f0fdae37b6e0e77cf62d832c3dc4efe&q=SpectronIQ+PD-DVR+100

Here you go, but the instructions arent that great to understand unles syou have hooked up one of these before

Protron... | Answered on Feb 15, 2011


I found the manual for the SpectronIQ PD-DVR100 available at Retrevo: http://www.retrevo.com/support/SpectronIQ-PD-DVR100-DVD-Players-manual/id/926dj289/t/2/ . You will need to answer a query to prove that you are human.

I hope this helps.

Cindy Wells

Protron... | Answered on Feb 14, 2011


Hi,

This is a common problem with most of the players after few years. More likely this is an issue with either the power board or any of the connections seems to be damaged or broken. Unfortunately, repair is not a wise option as the cost of repair would be more than the value of the product. You could try to disconnect the power supply for few minutes, say 15 minutes and see, if that helps. Unless, you need to open the player to check and inspect the cause. More often it is leaked / bulged / swelled caps that you need to replace which is easily available at radioshack or online.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Protron... | Answered on Feb 14, 2011


Fixed mine by opening up and replacing ide cable to the DVD burner. Was flashing hello. When opened up and touched the ide cable it would spin up the drive for a second. Its possible it was loose connection to the power plug in the drive but replaced ide cable just in case. Has been working perfect since. Very roomy inside and easy to do.

Protron... | Answered on Jan 18, 2011


hi,
Do you mean AT&T U-verse remote. then the code for protorn dvd plyaer is 2149
ok

Protron... | Answered on Jan 16, 2011


You can get the manual on the link below. Scroll down and type in the # code then click on download now.

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Good Luck

Protron... | Answered on Jan 09, 2011


Press Setup,Right Arrow,Press Down 3 Times,Then Enter 2 times this should reset factory settings,

Protron... | Answered on Dec 15, 2010

Not finding what you are looking for?
Protron PD-DVR100 DVD Recorder Logo

191 questions posted

Ask a Question

Usually answered in minutes!

Top Protron Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Protron Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Protron Televison & Video

  • Protron Televison & Video

Most Popular Question

protron lcd 26 tv model lt26cipi tv

  • Televison & Video
Loading...