20 Most Recent Protron PD-DVR100 DVD Recorder - Page 8 Questions & Answers


I thought I sent you an email two days ago that I have plugged in according to these diagrams and it still will not work. When I input Line 1 or Line 2, it does not "see" the Protron. In spite of this, I started the GoVideo playing a tape, and pressed the Record on the Protron, and what it recorded I do not know, as I was not successful in obtaining Disk Edit.
Question:
Maybe I should try to go from the TV through the GoVideo to the Protron?

Protron... | Answered on Aug 15, 2008


I can not set up my DVD, no reaction to remote control, no reaction manual bottons.
Can you help me?
Thanx
Have the same problem? Click Here
X This Problem has been added to the Share Your Expertise Page under "My Work Queue". OK

Protron... | Answered on Aug 15, 2008


Hi again,

This is a placeholder and would look forward to the diagrams.

Cheers.

Protron... | Answered on Aug 09, 2008


Turn on unit and put into TV/Tuner Mode
Press “Eject” button and confirm tray is out.
Press “repeat” button 3 times on remote
Press “0” button to make Region Free
When you see “OK” on screen, press enter or repeat on remote
Turn unit off
When you turn unit back on, it should be set for “Region Free”

Protron... | Answered on Aug 07, 2008


HOWDY-ARE YOU FAMILIAR WITH "HDMI"--DESCRIBE THE CONNECTOR YOU REFER TO--YOU ARE STILL TALKING ABOUT THE PD-DVR100--RIGHt? / RSVP------SARGE

Protron... | Answered on Jul 27, 2008


I need get manual to protron 100 dvd recorder
thanks

Protron... | Answered on Jul 26, 2008


DVDR WILL NOT RECORD SURROUND SOUND IF NO SURROUND SOUND IS INPUT-THE MACHINE WILL RE-PRODUCE FAITHFULLY ANY SIGNAL INPUT TO IT--SARGE

Protron... | Answered on Jul 25, 2008


what were you doing when the set display that figure kindly explain.then you can cntact me on this web site or on my email nicodhem@yahoo.com

Protron... | Answered on Jul 24, 2008


White-Left sterio (Mono single)
Red-Right Speaker
Yellow Video feed out

the connection to the VCR plug-in one of the three ports input
two in the back and one in the front of the panel that flip down on the right side as you look at the big silver buttons below them. flip down reach around the edge of the right side you feel a opening press in and pull forward, will open

if the VCR is a mono type only plug-in the white plug into it.

use remote control
Press uptop see "Source" then after press Channel - or + to get to the AV-1, AV-2, AV-3 (VCR plug-in one of them).. best press - to get the AV-Channels faster they are located below Ch-1

will i hope thats help you out

Protron... | Answered on Jul 13, 2008


Hi shadow - I could tell you how to do it but I'd probably just get you confused trying to follow my directions. I believe it's easier to look at the manual when possible and see any pictures. Below is a link for your manual. To download it just scroll down and enter the 5 letters in the box. I think you may want page 34. If this solves your problem PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks.

http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=8f0fdae37b6e0e77cf62d832c3dc4efe&q=SpectronIQ+PD-DVR+100

Jeff


Protron... | Answered on Jul 13, 2008


Check in the control remote of the dvd if they get the function progresive scan maybeyou push it by mistake and you activate it you need to deactivate.Good luck

Protron... | Answered on Jun 23, 2008


I think these are just junk unfortunately. I have tried multiple times with a reset problem on mine - I think these just have faulty power supplies? 

Protron... | Answered on May 30, 2008


I would unplug it... let it sit for a few minutes... plug it back in and see if it comes on... if not.. feel if its hot or even smell it for an electric burn odor.

If it never comes back on its possible a fuse inside the unit was blown.

Protron... | Answered on May 03, 2008


yes
read here Protron PD-DVR100 region code .
riz.

Protron... | Answered on Apr 11, 2008


misaligned laser causing it to stop and restart back to blue this unit would need a new laser put in it or for it to be recalibrated.

Josh

Protron... | Answered on Feb 28, 2008


marke sure you don't have it set on continue or continous loop. That should fix it

Protron... | Answered on Feb 27, 2008


24 hour mode is all there is. Time to learn military time.

Protron... | Answered on Feb 23, 2008


I set mine up today and made the same "fatal" mistake. I spoke to "tech support" 3 different times with no luck. After the third call he told me it was "simple fix" but I had to call a "senior tech" on Monday after 1 PM Eastern time. If it was so simple to fix why couldn't he fix it? What a joke! Does anyone out there know how to fix this problem?

Protron... | Answered on Jan 21, 2008


I did same thing and I got it back by pushing p-scan button.

Protron... | Answered on Jan 21, 2008


The coax output is just a passthrough. You need to go to the TV through the RCA output even if you have to go through a VCR or other component.

Protron... | Answered on Jan 21, 2008

Not finding what you are looking for?
Protron PD-DVR100 DVD Recorder Logo

191 questions posted

Ask a Question

Usually answered in minutes!

Top Protron Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Protron Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Protron Televison & Video

  • Protron Televison & Video

Most Popular Question

protron lcd 26 tv model lt26cipi tv

  • Televison & Video
Loading...