20 Most Recent Mintek MDP-1815 Portable DVD Player Questions & Answers


CHECK YOUR CABLE FIRST FROM DVD TO TV

Mintek MDP-1815... | Answered on Apr 23, 2017


There is a mechanical switch that is operated by the lid as it's closed. Sometimes, a DVD player such as yours can be made to work by pressing down on the lid but this is a sure indication that something is wrong with the switch. It isn't practical to hold the lid down for the entire time you're viewing a movie so repair or replacement is the only solution

Mintek MDP-1815... | Answered on Feb 18, 2015


Laser pickup unit to its DVD player faulty. Replace the DVD player.
If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/

Mintek MDP-1815... | Answered on Jul 12, 2014


Look at the end of the charger plug you will see a color ring near the tip, take the tip and carefully look for the hole, it will be on the side or the back of the laptop slightly bigger than plug and will have a little drawing showing a circle with + and - showing.

Mintek MDP-1815... | Answered on Jan 07, 2011


Hi, the problem you are having is very common with all types of devices such as dvd players,phones,laptops/netbooks, etc basically anything that flips or slides open, now what is causing the loss of feed to the screen is a damaged data ribbon.
this data ribbon is a thin piece of ribbon with several single strand copper wires running through it and what happens is over time when you keep opening and closing the screen this ribbon keeps bending so it keeps the connection between the screen and the circuit board in the bottom half of the player, now over time this ribbon becomes brittle and what then happens is one or more of the copper wires that run inside this ribbon become brittle and break this then causes loss of conection with the screen and you then get no picture or any sort of feed to the screen.

now if this was a phone that you had the problem with then it would be a very easy fix as most phone shops will stock the data ribbon and as its a common fault its cheap to get fixed, how ever as yours is a portable dvd player then this is a different story, you would need to take it to a electrical repair shop or tv repair shop and ask them if they can order and fit the part for you, but as its a Mintek one then the chances of repair are slim as parts are hard to come by as they are not made to be repaired, todays electronics are throw away items which i think is bad practice as most could be fixed for a few quid and would save them going to landfill, getting the part yourself would be pretty much impossible but if you take it to a tv repair shop they may be able to match the part up off something else and get it working for you.

you will need to ask about the price and then decide if its worth getting fixed compared to buying a new player, i would say if its more than 2 years old then i would scrap it as the laser unit will be the next part to fail, if its less than a year old i would try and get it fixed as you should be able to get at least another 12 months out of it if you can get the part and have it fitted.

let me know how you get on or if you need further assistance ok

Mintek MDP-1815... | Answered on Nov 13, 2010


the lcd flex is defective.

Mintek MDP-1815... | Answered on Oct 12, 2010


did you get a ac adaptor with your player? if not you can get one on ebay the # is ADPV26A 20.00 and it plugs into the side of the player to charge the battery

Mintek MDP-1815... | Answered on Aug 23, 2010


I just bought one on ebay for 25.00 just put in the battery pack # its probably RB-Li55 if its for the mintek 1815 player

Mintek MDP-1815... | Answered on Aug 23, 2010


Ebay, I have found everything there.

Mintek MDP-1815... | Answered on Jun 28, 2010


They sell adapters so you can plug more than 1 devise into the electronics input- you might have to buy one, see if the plug looks slimmer.

Mintek MDP-1815... | Answered on Jun 18, 2010


download it from manufacturers site

Mintek MDP-1815... | Answered on Jun 07, 2010


Hi
Check and see if you have A/V out jacks on the unit. If you do, they will be yellow, red, and white.
They are called RCA jacks, and if you have them, and the TV has the same type of jacks, then you just need the cable that goes in between. The DVD player normally comes with them, but if not, you can purchase them at any Circuit City, or even Walmart.

Mintek MDP-1815... | Answered on Nov 16, 2009


If the manufacturer doesn't make such a charger, you might simply check the voltage etc on the battery or bring it to a radioshack type place and ask them to get you or order you a car charger that matches all elements of the home charger.

Mintek MDP-1815... | Answered on Oct 19, 2009

Not finding what you are looking for?
Mintek MDP-1815 Portable DVD Player Logo

Popular Tags

81 questions posted

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18127 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mintek Televison & Video

  • Mintek Televison & Video

Most Popular Question

no picture appears screen when play

  • Televison & Video
Loading...