20 Most Recent Mintek Portable DVD/CD Player w - Page 5 Questions & Answers


So no button on the remote will work? Also what kind on a flat-panel tv is it? LCD or Plasma?

Mintek Televison... | Answered on Mar 16, 2011


Hi - No, they are made by Shinco in China.
Regards, Mikeyaf

Mintek Televison... | Answered on Mar 09, 2011


Is it plugged in?
If so have you changed the fuse in the Plug
if the answer to both of these is yes, it is a fault with the unit

Mintek Televison... | Answered on Mar 02, 2011


What kind of remote do you have?

Mintek Televison... | Answered on Feb 25, 2011


Computer device accessories at acquirablel from retail markets. Asscertain the model brands of the device in quetion, locate an electronic devices or appliance retails store to purchase from an array of products.

Mintek Televison... | Answered on Feb 14, 2011


Yes that is correct, over a period of time the laser becomes weaker and gets to a point it will not track, the second common problem the pladder motor that the disc sits on becomes defective and stops working. To fix this will require a brand new assembly that would not be cost effective to repair, but you can attempt to clean the laser lens with a Q-Tip and rubbing alcohol very carefully which might bring back the system.

Mintek Televison... | Answered on Feb 01, 2011


This caused by the captions, get the remote, press menu, scroll down to captions, right arrow press 1, 2, 3, off when the cursor is over the off press enter on the remote and that should get rid of the black box.

Mintek Televison... | Answered on Jan 28, 2011


THE SHACK THAY WILL HAVE IT.

Mintek Televison... | Answered on Nov 18, 2010


Hi,

the problem is from the laser (lens) of your player. The laser (lens) is very weak, that's why it's difficult for it to load DVD.

If you insert an Audio CD into the player, you will discover that it will load it without any problem.

Get a laser (lens) cleaner, use it to clean the laser (lens). If that doesn't solve the problem, then you will have to replace the laser (lens) of your player to a brand new one and the problem will be solved.

Good luck.

Mintek Televison... | Answered on Nov 09, 2010


Hello,

Yes, you can buy a remote your Mintek DVA8700. Also, the unit can receive AM/FM radio because it has AM/FM radio.

Good luck.

Mintek Televison... | Answered on Oct 08, 2010


if they don´t charge are damaged replace him

Mintek Televison... | Answered on Oct 02, 2010


www.batteries.com would have them otherwise you would search on ebay for them. it will be pretty much a universal type battery.

Good luck with that.

please do leave feedback and ratings for your free answer today.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Mintek Televison... | Answered on Oct 02, 2010


Check on radio shack

Mintek Televison... | Answered on Sep 10, 2010


Go to www.remotecontrols.com to purchase a new remote

Mintek Televison... | Answered on Jun 13, 2010


On the Mintek remote control you have to make the proper selection. For example if you typically have to have the television on channel 3 to receive Comcast you would select 3.0 or 3-0 enter/select/ok
or 4.0 or 4-0 enter/select/ok

Perhaps the Comcast receiver will not come in on channel 3 or 4. In that instance you would need to select the correct input or video source. There should be an input or video button on the Mintek remote control as well. If there is an input or video button on the television itself please press it over and over again until you have landed on the right input.

Mintek Televison... | Answered on Jun 01, 2010


Hi,

The default password is '88888' (five 8s). Try inputting this default password when it asks you to input. Or you can go to the password reset/change menu and input this default password to remove the already set one.

Mintek Televison... | Answered on May 28, 2010


Go to the link below and click on your remote. Once there on the left click on remote codes under troubleshooting.

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotehome.shtml

Mintek Televison... | Answered on May 11, 2010


change the little motor that control the tray or the rubber that goes from the little motor the tray.good luck.

Mintek Televison... | Answered on Feb 28, 2010


push it down no if theres a problem then either see a tech or buy another one you will pay a tech about 35 dollars for one hour to fix it not including parts so if you can buy a new one for cheaper or the same price why not do it

Mintek Televison... | Answered on Feb 25, 2010


Make sure the antenna lead / or from the cable modem / is plugged into the TV.

If this is not the fix, make sure that the leads from the DVD player are in the right place.

The leads from the DVD player go to the inputs on the TV.

Mintek Televison... | Answered on Feb 21, 2010

Not finding what you are looking for?
Mintek Portable DVD/CD Player w Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18136 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mintek Televison & Video

  • Mintek Televison & Video

Most Popular Question

player works fine tv picture will not

  • Televison & Video
Loading...