20 Most Recent
- Page 6 Questions & Answers
I have a Mintek DTV-173
It is not available online with any of the vendors. The only 2 options :-
1. You would be able to find some old DTV-173 in salvage or junkyard. Purchase that and replace the part.
2. There is only one seller who have boards for Mintek :-
The above board might not be suitable for your board. Contact the seller and try to get all the information.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
on Oct 22, 2009
A DVD is stuck inside the TV
Do not touch any components on the circuit board. Remove jewelry, wear safety glasses and gloves. Remove all the screws from the back with an arrow pointing to them and any screws on the bottom holding the PC board in. Discharge the tube if it is a CRT by grounding a screwdriver to the chassis ground with a clip lead. Slide the screwdriver under the "suction cup" on the tube with the large red wire coming out. Disconnect all the connectors from the PC board and write down how to reconnect. Slide out the PC board and retrieve the disc from the DVD mechanism. Reassemble
on Sep 02, 2009
When disc is loaded, it stays on loading and
Sounds like the laser has developed a fault, first i would try cleaning the laser lens with a CD / DVD Cleaning disk and if that fails , open it up and using a Q-tip and methylated spirits , dab a small bit of Meths on the cotton tip and in a circular motion clean the laser eye gently But Make sure it is unplugged, if that fails you will need a new laser lens.
hope this at least helps.
on Aug 07, 2009
Not finding what you are looking for?