20 Most Recent Denon AVR-3805 Receiver Questions & Answers


I'm afraid that sounds like an issue with the power supply that feeds the main power amps. Especially on all channels. Could be the capacitors associated with the power supply. Sometimes you can see them bulging or even stuff coming out of them!

Denon AVR-3805... | Answered on Mar 02, 2018


All Denon Authorised Service Centres have access to all spares required direct from either Denon or their allotted wholesaler. Worldwide.

Denon AVR-3805... | Answered on Sep 23, 2017


No as there is no volume control on the zone outputs

Denon AVR-3805... | Answered on Aug 18, 2017


Dolby signals are passed via either an RF cable or optical link. Both the receiver and player need to have these switched on and that they are passing the correct signals. You clearly found the correct setting for the TV sound link. Now you just have to find the one for the DVD player.

Denon AVR-3805... | Answered on Jun 02, 2017


Attach them to the appropriate terminals on the rear of the receiver

Denon AVR-3805... | Answered on Aug 12, 2016


It sounds like you hit the ANALOG button. Press the MODE button to get back into AUTO.

Denon AVR-3805... | Answered on May 23, 2016


You would be best to use an HDMI cable. If that is not available on your products, use the component cables for the video, and a digital or analog cable for the audio.

Denon AVR-3805... | Answered on Jan 07, 2015


The only way would be component cables, and digital or analog audio cables. I believe there are HDMI to Component convertors as well.

Denon AVR-3805... | Answered on Jan 07, 2015


Contact Denon, or have at their website.

Denon AVR-3805... | Answered on Jan 07, 2015


Your Denon receiver may be going into overload, which comes from playing it too long, and too loud. Try reducing the volume to 1/2 your normal level. If you still have issues or questions, please visit my website at audioserviceclinic.com. Thank you.

Denon AVR-3805... | Answered on Dec 17, 2014


Your Genelec 1037C monitors are professional design with balanced inputs. Balanced inputs expect a low impedance signal with pin 1 earth, pin 2 hot and pin 3 cold. Because the Denon amplifier supplies a pre out for the front speakers (the first pair in the set of pre outs) at 1.2 volts and high impedance, you will need to convert the signal close to the amplifier with a stereo active DI box. Plug the pre out directly into the input of the DI with a SHORT lead and then plug two standard balanced microphone type cables ( XLR to XLR) into each of your active monitors. You cannot make a cable that is RCA to XLR by shorting pin 3 to earth to do this job properly. The inputs on your Genelecs expect a signal in the range -6dBU to +6dBU for rated output. A suitable DI box would be for example a Klark Teknik DN200. Hope that helps.
Cheers, Don.

Denon AVR-3805... | Answered on Dec 09, 2014


headphone jack cable to 2x RCA/phono (red & white) cable. Connect that to a spare input on the amp.

Denon AVR-3805... | Answered on Sep 12, 2014


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Reset procedure to many electronic entertainment equipment are given.

Denon AVR-3805... | Answered on Jul 30, 2014

Not finding what you are looking for?
Denon AVR-3805 Receiver Logo

Popular Tags

180 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Denon Audio Players & Recorders

  • Denon Audio Players & Recorders

Most Popular Question

get play suround from tv its lg

  • Audio Players & Recorders
Loading...