20 Most Recent Denon AVR-2802 - Page 6 Questions & Answers

(1)Download AVR3310 service manual.
(2)enter debug mode to see what kind of protect it belongs to.
(3)DC or ASO protect
(4)DC protect to check all smd transistors if leakage occurs or
differential and voltage amp transistors leakage
(5)ASO see service nanual troubleshooting steps.
(6)Replace all defective components.

Denon Audio... | Answered on Jun 24, 2019

You can buy any Denon av-amp remote to control your av-amp.

Denon Audio... | Answered on Jun 21, 2019

Hello Terry, your Denon AVR 2808, is not compatible with HDMI 4K signals, only for HDMI type 1.3, HD signals
You can use your TV to connect all HDMI 4K sources and send a fiber optic connection from the TV to the Denon to get the sound of the equipment connected to the TV
Greetings Franco Dosil

Hola Terry, tu Denon AVR 2808, no es compatible con se?ales HDMI 4K, solamente para se?ales HDMI tipo 1.3, HD
Puedes usar tu TV para conectar todas las fuentes HDMI 4K y envias una conexion de fibra optica desde el TV, hacia el Denon para obtener el sonido de los equipos conectados en el televisor
Saludos Franco Dosil
https://www.denon.es/es/product/hometheater/avreceivers/avr2808 https://www.denon.co.uk/uk/product/hometheater/avreceivers/avr2808 https://ca.denon.com/ca/product/hometheater/receivers/avr2808ci?docname=avr-2808ci-om-e_102.pdf

Denon Audio... | Answered on Jun 13, 2019

Reset the amp to factory default may solve your problem. Download service AVR2312 to see how to do.

Denon Audio... | Answered on Jun 12, 2019

Hi Gordon, the wireless headphones, has a transmitter that is connected to the VCR 1 or VCR 2 outputs, or to the output of PreOut Front L R, in this case the sound level a to be modified by the general volume control of the Denon
I hope you can connect and enjoy your headphones
I sent you a link to download the user manual of your Denon, there on page 9 you will see the connections that I tell you
Greetings Franco Dosil

Hola Gordon, los auriculares inalambricos, tiene un transmisor que va conectado en las salidas VCR 1 o VCR 2, o a la salida de PreOut Front L R, en este caso el nivel de sonido a a estar modificado por el control de volumen general del Denon
Espero puedas conectar y disfrutar de tus auriculares
Te env?o un link para que descargues el manual de usuario de tu Denon, ah? en la pagina 9 veras las conexiones que te comento
Saludos Franco Dosil

Denon Audio... | Answered on Jun 12, 2019

Any power amps able to connect to pre-out can be used and of course, choosing a power amp with large rating is better.

Denon Audio... | Answered on Jun 09, 2019

" "I have seen a manual I which it said that dc issue, do anyone know how to disable the power on fault checking" You cannot do this. Protection can only be kicked out when no dc is coming out from speaker terminals. This holds no mater whether differential and voltage amp are defected (leakage) or protect detection SMD transistor(s) is/are leaked. They act as a switch. Download X2100W service manual and enter debug mode to check if DC or ASO(over-current protect ) makes protect.

Denon Audio... | Answered on May 29, 2019

“My reomote sensor is not lit and I have no sound coming from speakers” For your symptom, not related to remote sensor but to digital decode board such as DIR,DSP and LPF. Download service manual and enter "debug mode" to locate defective circuit(s).

Denon Audio... | Answered on May 27, 2019

download AVE1907 service manual and check all voltages supplied to panel including (positive and negative voltages as well as an AC voltage.
). If they are correct, replace all capacitors located on this board.

Denon Audio... | Answered on May 19, 2019

The carousel indexing mechanism has failed. A common failure of this type of player

Denon Audio... | Answered on May 13, 2019

Its possible you have a bad audio driver board that once it heats up starts causing that problem. Try taking to radio shop unless your good with electronics.

Denon Audio... | Answered on Apr 26, 2019

Download your av-amp model service manual to solve the problem.

Denon Audio... | Answered on Apr 24, 2019

Page 8 shows the input options. Cable should be the same as FM input:

Denon Audio... | Answered on Apr 21, 2019

Not finding what you are looking for?
Denon AVR-2802 Logo

96 questions posted

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts


Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers


Level 3 Expert

85222 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Denon Audio Players & Recorders

  • Denon Audio Players & Recorders

Most Popular Question

denon avr 2802 no sound

  • Audio Players & Recorders