20 Most Recent Mitsubishi WD62628 62" Projection HDTV - Page 2 Questions & Answers

Please click HERE to download training manual of WD-62628 that has all required info about troubleshooting. Training manual usually made for techs to understand that how tv circuit board work.
Hope this will help.

Mitsubishi... | Answered on Jun 15, 2011

If your set is like mine hold menu & device for 5 seconds and you will get an error code.

Mitsubishi... | Answered on Mar 09, 2011

my first instinct on this is the mirror inside has come loose. or possibly brpken. can you describe the picture. angled down? let me know how it goes

Mitsubishi... | Answered on Feb 26, 2011

I have the same problem, and all I did was replace the bulb and housing the picture is not a true horizontal, the picture is tilted to the right....Any ideas>>??

Mitsubishi... | Answered on Jan 30, 2011

I had a similar problem with my 42 in Philips LCD HDTV.

Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors on the PSB. Many major electronics companies Philips/Magnavox, Sony, Panasonic, and others were sold capacitors that failed in 2-5 years instead of 10-20. The capacitors fail prematurely due to a lack of preservatives. Unfortunately, they were installed in all sorts of devices and cause a wide range of failure problems.

Here are some options for you.

1. Have it fixed by a professional $$$$$$$??????? (Is it under warranty?)

2. Open your TV and find PSB. (The board that the power cord plugs into) Check for faulty caps. If you find some (bulged or leaking) bad caps replace the entire board. The entire board costs around $250 right now because they are in high demand right now. They can be found at tv-part.com but supplies are limited. I would definitely shop around though.

3. Remove and then replace individual faulty caps. This takes some soldering skill.

Caps are inexpensive and if you can take care of it yourself it will save you hundreds.

This may be your problem. If you determine that it might be.

I have a Tip/How TO tutorial on this site that may also help. It gives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. Here is the Link: Fixing the Philips Turns/shuts off on its own problem. I'm working on uploading pictures to help guide people though the process as well. Let me know if I can do anything to help.

Hope this helps and if it does please rate it accordingly. Good luck.

Mitsubishi... | Answered on Dec 15, 2010

When did you replaced lamp in tv last time?
If lamp has not been replaced in last 2-3 years then its time to get it replaced as weak lamp, that has reached to end of working life, can cause that symptoms in tv.
Let me know if you have additional question.

Mitsubishi... | Answered on Sep 30, 2010

the blinking light signifies to a repair technician with capacitors or circuits are having an issue they can diagnose the problem via the amount of blinks in between pauses however it will require a technician and some specific tools and schematics to fix and it may be cheaper if its no longer under warranty to purchase a new one

Hope this helped

Mitsubishi... | Answered on Sep 25, 2010

usually it's the "steady sound" or something along that type of name.  maybe auto level.  needs to be turned OFF

Mitsubishi... | Answered on Jul 28, 2010

Reset the tv by pressing menu and 2470 then enter. If this doesn not fix then you have either a bad e2p or dm.

Mitsubishi... | Answered on Jul 06, 2010

Your convergence is off. See the owners manual or call tech support to walk you through a convergence.

Mitsubishi... | Answered on May 06, 2010

To remove the spiderwebs, you don't need to take the whole thing off. You just need to remove the screws around the screen frame (top and sides). The screen frame and mirror cover can be separated several inches with ease. You just need to use a flexible duster, one of those electro-static attracting numbers would be great, to clean the web out. Be careful not to disrupt the rear, large mirror and don't scratch the screen. Good luck.

Mitsubishi... | Answered on Mar 15, 2010

if you have replaced the caps on the DM and the FMT and power supply. you can unplug the e2p. the set will run without it if it is the problem, however it will take 5 to 10 minutes to boot up so be patient.
if it boots try turning it on. the picture should look terrible because no
light engine data is getting to the dm. chances are it is not the e2p, in the over 300 of these chassis i have repaired maybe 10 had a bad e2p. most likely the chassis needs to be rebuilt. check out www.tv-techs.com

Mitsubishi... | Answered on Feb 18, 2010

Try a hard reset according to the manual's instructions.

Mitsubishi... | Answered on Oct 24, 2009

It Sounds like to me that there is something with in the Optical block causing the problem.
I would recommend a professional to look at it and confirm this.
Hope this helps,

Mitsubishi... | Answered on Jul 18, 2009

If you power cycle the set and wait till the light stops blinking, the set should work. It sometimes takes 5 minutes to stop. If it doesnt work the first time, try again.

Mitsubishi... | Answered on Jul 07, 2009

Varify that the lamp door is totaly closed and tight. The door switches do not tell the Main Micro. the door is closed unless door is flush
with rear cabinet.
Hope this helps,

Mitsubishi... | Answered on Jun 18, 2009

first try resetting and rebooting. reset = menu, 2470, enter.
reset is press reset button and wait for green lite to stop blinking.
if that takes care of it great. if not it sounds like a signal board or dm problem and will need repair. check out www.tv-techs.com

Mitsubishi... | Answered on Jan 07, 2009

Not finding what you are looking for?
Mitsubishi WD62628 62" Projection HDTV Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers


Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WD Mitsubishi

  • WD Mitsubishi

Most Popular Question

black lines come go not stay all time

  • Televison & Video