20 Most Recent Akai PT5492S 54" Rear Projection Television - Page 7 Questions & Answers


make sure it's not muted. you can also change from lift to right speakers. you may have burned up the audio driver amp.

Akai PT5492S 54"... | Answered on May 26, 2008


I will buy a new TV before I'll fall for this scam.

Akai PT5492S 54"... | Answered on May 20, 2008


www.partsstore.com should carry parts for your set

Akai PT5492S 54"... | Answered on Mar 23, 2008


Well thank you for the info. I am on cable so I guess there will be no problem. Appreciate your time Jon865

Akai PT5492S 54"... | Answered on Mar 16, 2008


If you cannot converge the red and blue back to the green through the convergence menu, Then you have worn out convergence ICs you will need 2 of them at about 10.00 each. Takes about an hour to remove the old and replace with new ones, but also check the resistors right next to the ICs usually 1 or 2 of these burn out with the ICs. Let me know if you need more information.

Akai PT5492S 54"... | Answered on Mar 11, 2008


To reset this condition usually requires a visit to the repair shop. To clear the parental control from the AKAI brand sets, you must enter the "Service" mode of the television. WARNING: There ARE adjustments in the service menu that CAN destroy your television if improperly adjusted.

This should not matter to you as long as you are simply reseting the parental lock function.

You must have the ORIGINAL FACTORY remote. (The one that came with the television when it was new.)

With the remote press the following one at a time in order:

MUTE - 1 - 8 - 2 - POWER.

Now you should be in the service menu where you should see RESET. Select reset and enter. Turn off TV.

Your done. When you turn your set back on, the code should be cleared.

Akai PT5492S 54"... | Answered on Mar 11, 2008


I have one here in Tennessee. Call Jon's Electronics (865) 908-7108. Or, you can post your request on my website by registering free at http://www.posoftn.com and save the long distance charges. -Jon.

Akai PT5492S 54"... | Answered on Mar 11, 2008


Mostly likely,convergence IC's will need changing and a

soldered in pico fuse located and replaced.

Akai PT5492S 54"... | Answered on Mar 02, 2008


Scratched how? Screen, fabric, case??? let me know and I'll certainly try to help. Bill

Akai PT5492S 54"... | Answered on Feb 03, 2008


I would contact Akai for the owners manual. For the remot i am posting a link. They have virtualy any remote for any model and they offer fast shipping.Just enter your model number and that will pull up the remote no programming needed.
http://www.replacementremotes.com/store/index.cfm

Akai PT5492S 54"... | Answered on Feb 02, 2008


try to degauss the screen....
here is a a little guide on how to do it if your tv doesnt have the option
http://www.wikihow.com/Degauss-a-Computer-Monitor

Akai PT5492S 54"... | Answered on Dec 29, 2007


Most cable boxes have outputs for audio and video. Yellow is the video, red is the audio out for the right side and white is the audio for the left.
Take a set of RCA jacks and hook it up to the back of the set on input one.
Yellow to Yellow
Red to Red
White to White.
You need further instruction, respond to this post and I will reply.

Akai PT5492S 54"... | Answered on Dec 17, 2007


Problem as described is a repair = replace both STK392-040
convergence IC's....I use Panasonic brand = no recalls...
Do not use generics,,,,,,,,,,,,,T.

Akai PT5492S 54"... | Answered on Dec 16, 2007


Sounds like a regulator problem, possibly the low voltage side of the regulator. Could be the the regulator itself has shorted which in this unit is a STRF6628. If you're trying to attempt repairs yourself take a look at C834 100uf/25v next to the regulator and see if it's possibly open. If so replace it and see if the unit will power-up and let me know..
Bill

Akai PT5492S 54"... | Answered on Nov 21, 2007


it sounds like you are having convergence problems if that is the case the ic's will have to be replaced

Akai PT5492S 54"... | Answered on Nov 12, 2007


I can help you. Call me  910-8936663

Akai PT5492S 54"... | Answered on Oct 27, 2007


I have the solution.  Call me  910-8936663

Akai PT5492S 54"... | Answered on Oct 27, 2007


Probable microprocessor IC lock-up.Usually found on signal

PCB==expensive to change out.Sorry--no easy fix on this one.

Akai PT5492S 54"... | Answered on Oct 12, 2007


Replace convergence IC's and locate & replace open fuse

device (probably a pico fuse soldered in underneath IC heatsink).

re-align convergence.

Akai PT5492S 54"... | Answered on Oct 12, 2007

Not finding what you are looking for?
Akai PT5492S 54" Rear Projection Television Logo

182 questions posted

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

KISHORE DESHPANDE

Level 2 Expert

64 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Akai Televison & Video

  • Akai Televison & Video

Most Popular Question

gracias amigo fijate que ahora si

  • Televison & Video
Loading...