20 Most Recent Jenn-Air JJW9330D Electric Single Oven Questions & Answers


Probably the cord to the spring is broke on the one side...

That is not that hard to fix and you can easily buy the parts yourself online...

Here is a tip that will help you with the online buying...

How to Buy
Appliance Parts Online


Jenn-Air... | Answered on Jan 16, 2011

Try to unplug it from power. Wait 10 minutes and plug back in outlet.Sometimes electronics need to be reseted.

Jenn-Air... | Answered on Dec 31, 2009

Maryann, try shutting the breaker off for 5 minutes and see if the door unlocks. Im assuming the oven has cooled down. If that doesn't work try holding the cancel and broil pads for 3 seconds. This will put it into the quik test mode. Once in this mode press the clean button. This should toggle between lock and unlock. Don't know if this will work for you but it's worth a try..Catriver...post back.

Jenn-Air... | Answered on Jan 10, 2009

You need to check the safety fuse first

Jenn-Air... | Answered on May 31, 2008


If you have connected correctly and the ribbon cable is also fine then it seems that the touch pad is bad and should be replaced. Hope this helps...please post back for further assistance.


Jenn-Air Ovens | Answered on Apr 15, 2019


Jenn-Air Ovens | Answered on Apr 13, 2019

FR Second oven error sensed

The unit never detected a sufficient rise in temperature in the second oven.

Jenn-Air Ovens | Answered on Jan 24, 2019

wet shorted circuits

Jenn-Air Ovens | Answered on Dec 18, 2018

Request the manual directly from JennAir

Jenn-Air Ovens | Answered on Nov 13, 2018

whenever you set an oven it always starts at 100,if that's an electric oven most likely the bake element is bad and the broil element is just working and heating up the oven,when you set the oven to bake both the broil and bake elements get hot.if it's gas most likely a bad ignitor,send the model number if you write back,also if that's an electric oven make sure you flip the breaker so there's no power going to the oven before you try to remove the element,i see people try to remove the element with the power still on and when they pull out the element the wires touch the metal and bang they short out the clock assy.kill the power,remove the two screws that hold the element in place or if this isn't a wall oven slide out the oven,unplug it,remove the back wall and with a meter read out the element,remove at least one of the wires first and then check it,very simple set your meter to 20k,ohms touch the leads to the element where the wires connect to it,if you see a 1 the element is bad or open,if you see anything else but 1 the element is good or closed,hope this helps you out

Jenn-Air Ovens | Answered on May 26, 2018

Not finding what you are looking for?
Jenn-Air JJW9330D Electric Single Oven Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Cindy Wells

Level 3 Expert

6048 Answers

Nathan Van Boven
Nathan Van Boven

Level 2 Expert

206 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jenn-Air Ovens

  • Jenn-Air Ovens

Most Popular Question

jenn aire jjw93330ddb wiring

  • Ovens