20 Most Recent Euro-Pro Shark 80 - 7133 Questions & Answers


Hello, this is Ava with Think Crucial.

You may find the User's Manual for your Shark model by clicking the link below.

Shark 7132L Instruction Manual

You can purchase a wide variety of high quality Shark replacement parts for your Shark vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/collections/vendors?q=Shark

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

Euro-Pro Shark... | Answered on Nov 05, 2017


have you tried oiling it after you clean out all the dust and thread ends, you can take the feed dog plate off and clean under there as well. hope it helps

Euro-Pro Shark... | Answered on Jul 23, 2017


Good luck. I've never found anything reference to any online or hard copy for any Euro-Pro. You might try calling HSN or QVC whomever it was that sold these... and see if they can get you one.

Euro-Pro Shark... | Answered on Apr 02, 2017


Hi - You can download the manual from the link underlined in blue below:

Model 9130H

34c8464.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Euro-Pro Shark... | Answered on Nov 08, 2016


no doubt the timing is off just a little .

Euro-Pro Shark... | Answered on Mar 03, 2016


try this site, and ask them ultimatesewingandvac com

Euro-Pro Shark... | Answered on Feb 28, 2016


Release the screw on the needle. Back up the machine manually. Grab the need head with a pair of pliers and lever the needle upwards until it comes up from the bobbin. Keep it straight or the needle will snap. Strip it down and find out what caused it?

Euro-Pro Shark... | Answered on Aug 21, 2015


I have the same problem; my euro-pro 7130 is also sewing in reverse only, and I cannot make it go forward. Did you find an answer?

Euro-Pro Shark... | Answered on May 23, 2015


There should be a release lever behind the foot area of the machine. OR is it stuck??

Euro-Pro Shark... | Answered on Oct 15, 2014


It's tricky. If you have your manual follow that. If not try to reverse how you took it out. It is difficult to say without diagrams.Just make sure the pointy bit fits snug in the right hand side and will move a little but not too much. sorry I can't be more help without actually showing you. Perhaps there is something on youtube? Best wishes

Euro-Pro Shark... | Answered on Jun 20, 2014


Contact manufacturer for manual or a link to download manual

If you need further help, reach me via phone at https://www.6ya.com/expert/frankie_091f536560a54e12

Euro-Pro Shark... | Answered on Jun 03, 2014


If your manual doesn't say anything about oiling you don't have to. A lot of the newer machines do not call for oil and you could mess up your warranty if you use it.

Euro-Pro Shark... | Answered on May 18, 2014


try these sites
sewvacdoctor.com
a1sewingmachines.com

Euro-Pro Shark... | Answered on May 06, 2014

Not finding what you are looking for?
Euro-Pro Shark 80 - 7133 Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Euro-Pro Sewing Machines

  • Euro-Pro Sewing Machines

Most Popular Question

shark 9015 manual

  • Sewing Machines
Loading...