Samsung SCX 4521F All-In-One Laser Printer - Page 8 - Answered Questions & Fixed issues
Scanner locked Samsung error 0x00000015
You need to enable WIA - Windows Image Acquisition. now to do that follow these steps.
1. Click on start or the Window thingy.
2. Type Services or Services.msc in the search part.
3. Now scroll to the following services in the window that got opened.
Remote Procedure Call (RPC)
DCOM Server Process Launcher
RPC Endpoint Mapper
Shell Hardware Detection
Enable those services. To do so right click on them, click properties and make it automatic. Once you enable all of them start them. After all the services are started scroll for "Windows Image Acquisition" make this automatic too and start it.
on Sep 25, 2013
First check and make sure that all of the fans are working properly. If the fans are ok, then most likely the problem will be the fuser.
on Sep 06, 2013
Samsung SCX-4521 "Paper Jam 2" won't clear
I had this problem too. For me the answer turned out to be the paper sensor in the back part of the machine, behind the little back door just under the top part of the machine. This sensor hangs down from a thin rod that runs across the width of the machine, and is held in place by a small spring that encircles the same rod that supports the finger. The finger had apparently gotten moved so the spring was dislodged from its proper place. I was able to rotate it around the rod with my finger & get the spring moved back to where it should be. This seems to have cleared the problem--I'm keeping my fingers crossed.
on Jul 24, 2018
Not finding what you are looking for?