20 Most Recent NetGear : WG111 54 Mbps Wireless USB 2.0 Adapter, RETAIL (DSNGWG111) Questions & Answers

After installing netgear router and wg111v2 it has slowed my pc down laptop fine tho?

Dear Customer,

Yes It will happen,cause of protocols handling on router with your main pc,

SO,try to use another higher configured pc or you can use server like pc,

Never try to handle router on lower configured pc ,its affect on you r work ,its defanetly very slow-down you work,

SO try my solution you will get more speed,

THNX

NetGear : WG111... | Answered on Apr 07, 2019

1 Answer

I have a NETGEAR WG111v2

Hi

Go to
https://www.netgear.com/support/download/

type in WG111 ( v2 will show up)

select Software Version 4.0.0 for Windows

on right hand side right below and you will be fine

Good Luck

NetGear : WG111... | Answered on Dec 28, 2017

1 Answer

The Netgear is properly installed and all status

Call your ISP and have them reset/clear the connection. It sounds like your MAC address is locked and they can correct that.

NetGear : WG111... | Answered on Jun 07, 2017

1 Answer

Netgear WG111v2 Smartwizard ERROR.

I cant help sorry

NetGear : WG111... | Answered on Mar 29, 2017

3 Answers

Belkin fsd7050 network adapter wont install.

no answer?

NetGear : WG111... | Answered on Nov 22, 2016

2 Answers

Netgear N150 Wireless usb adapter just installed.

This means the DHCP service is not enabled on the wireless router.

either enable the DHCP service on the wireless router

or

Give a static IP onto your wireless NIC card ( Netgear N150 Wireless usb adapter )

NetGear : WG111... | Answered on Jan 21, 2016

2 Answers

Lost cd for wpn111,using xp.sp3 had to reload

please download latest driver from following link and install in computer

http://kb.netgear.com/app/answers/detail/a_id/12520

NetGear : WG111... | Answered on Dec 02, 2015

1 Answer

Netgear adapter disconnected

That is because your have installed some proprietary software to control the wireless connection, and windows cannot use it.

So you get no connection.

Remove the surplus software and let windows take care of the connection, this should solve the problem.

NetGear : WG111... | Answered on Mar 08, 2015

1 Answer

How to fix data connectivity?

This a wireless adaptor, not a router.

You need to use the correct driver software for the Apple Mac.

from Here

WG111v2

NetGear : WG111... | Answered on Mar 08, 2015

6 Answers

I installed netgear adapter WG111v3 and I keep losing internet connection

I had the same problem and when checking the properties of the adapter under device Manager.

I found the under the Power Management Tab the option to

"Allow the computer to turn off this device to save power" was turned on.

Remove the check mark from this option and click OK.

NetGear : WG111... | Answered on Jan 06, 2015

5 Answers

Where is the cap 5 cable located?

The Question is not clear. Pls be more specific

NetGear : WG111... | Answered on Jan 06, 2015

1 Answer

How do I permanently disable the radio on a usb wireless adapter?

Hello, welcome to fixya support. If you have the driver of the device already installed, you can disable it completely from the control panel.

For windows 7:
Go to Start-->Control Panel-->Device Manager-->Expand the group named "Network Adapters" find the one corresponding to your netgear device, then right-click on it and click Disable.

Also, you can check for it in the group "Universal Serial Bus Controllers". As mentioned previously from Control Panel , expand that group and if you find a corresponding driver related to netgear adapter, just right-click on it and "Disable".

In case that you already have netgear software installed along with your USB adapter, please disable the radio function from there.

More info on this can be found from the user manual (relevant pages 27, 33, 34).
Download from here:
http://www.downloads.netgear.com/files/wg111_user_manual.pdf

NetGear : WG111... | Answered on Aug 29, 2014

1 Answer

Netgear WN111V2 adapter disconnected

you may have to reset the wireless network and the computer and restart the network first then the computer

NetGear : WG111... | Answered on Jan 27, 2014

1 Answer

Netgear WN111V2 adapter is disconnected

Uninstall the AVG program or see what the firewall settings are.

NetGear : WG111... | Answered on Nov 24, 2013

0 Answers

Marvell device v1.0.1.2

NetGear : WG111... | Posted on Sep 26, 2013 | Be the first to answer

2 Answers

Lost disk

If your computer has an SD slot, just save the drivers to an SD card, then plug it into the computer that needs the drivers. No need to burn a CD for just a single driver.

NetGear : WG111... | Answered on Jul 27, 2013

1 Answer

How do i connect wg111v3 to the computer router

Hope this helps.
Ch.1 Basic Setup includes Installation and Connection.

NetGear : WG111... | Answered on Oct 26, 2011

1 Answer

How do you manually install

Best option may be to use a computer with an internet connection, go to netgears website, locate the product you own and download the driver onto a thumb drive and use that file to install the driver on the computer with the wireless adapter.

NetGear : WG111... | Answered on Jul 27, 2011

1 Answer

I need drivers for my

Go to Netgear's support site here http://support.netgear.com/app/home/session/L3NpZC9wWTFnQzN5aw%3D%3D

You'll need to know the letter that follows the wg111 to pick your model then you should be able to find the driver for your operating system and download it.

NetGear : WG111... | Answered on Jul 03, 2011

1 Answer