20 Most Recent NetGear WG111T 108 Mbps 802.11g Wireless USB 2.0 Network Adapter (NETWNGWG111T) - Page 9 Questions & Answers

You get the network key from the supplier of the router.

Read the manual if this is you.

NetGear... | Answered on Mar 19, 2015

  1. From the Start menu, select Control Panel.

  2. In the Control Panel Home window, click on .

  3. Double-click on .

  4. Select .

  5. A list of wireless networks within range will be displayed. Choose your wireless network from the list and click .

  6. If security is enabled on your wireless network, enter your wireless and click OK

If you do not see your wireless network displayed in the list :

  1. Check that the PC has wireless capability, and that it's wireless is enabled. Many laptops have a physical switch or button for turning wireless on and off.

  2. If your wireless network is configured not to broadcast it's presence, for security reasons, this article may help : How to manually add a wireless network in Windows 7 and Vista.

NetGear... | Answered on Mar 19, 2015

First call your ISP and make sure your acct is update ($$$) sometimes they disconnect if something is wrong with your acct. Also they will help you to resolve any issues. Finally get here again!

NetGear... | Answered on Mar 19, 2015

It is on a sticker

NetGear... | Answered on Mar 18, 2015

There is a small pen sized hole on the back of the router. Use a ball point pen to press and hold down the reset button for a bout 15 seconds.

Use an Ethernet cable to connect a computer to any one of the four LAN ports of the NETGEAR router.

In a web browser, enter the router's IP address - either or by default.

When prompted for a Username and Password, enter the default username and password (admin; password). NETGEAR recommends changing the default password to increase the security of your network.

NetGear... | Answered on Mar 15, 2015

Probably just need to reset the cameras so they obtain an IP Adress that is valid on the SC network.

NetGear... | Answered on Mar 11, 2015

Which is it? You say it is connected but cannot connect.

NetGear... | Answered on Mar 11, 2015

Check the security key settings.

NetGear... | Answered on Mar 11, 2015

It's not intended to link to a cell network. You need a data connection from Comcast or U-verse.

NetGear... | Answered on Mar 11, 2015

If you can see the SSID for the router from a WiFi device then it sounds like a security key issue. While connected through a cable login to the router. You should be able to trouble shoot the WiFi service from the router UI.

NetGear... | Answered on Mar 11, 2015

Probably need the security key

NetGear... | Answered on Mar 11, 2015

I don't know Buffalo routers in particular, but it should be possible to assign fixed IP to specific network devices.
You stumble over a feature called DHCP that causes network devices to get random IP from a given range. To be clear on this: DHCP randomness is not a fault at all.

Look for "static IP adress" or "fixed adress" in your Buffalo router. It should be in or near the DHCP dialog. Maybe you have to enable expert mode.
In case you found that you can most likely assign IP's like 192.168.x.x (x-es depending on your network) to devices identified by MAC-Address.
MAC Address has nothing to do with Apple Computers. It's a worldwide unique network hardware address. Each of your cameras has one and your router usually displays them somewhere in a list of known network devices. They look like 00:0C:29:9B:AD:B7 or 00-0C-29-9B-AD-B7.
Assign the IP-Addresses you are used to and the cameras should be accessible at their address as soon as you rebooted them once (power off/on).

P.S. There is so much more to know about networking which i can't generalize here. Don't be ashamed to ask someone near to come over and help you set this up. Better than accidentally messing things up.

NetGear... | Answered on Mar 10, 2015

No, it will not work.

You need to look at the guarantee, to see if you can get it replaced.

NetGear... | Answered on Mar 09, 2015

The security code is wrong, check on the back of the router for a label saying what it should be.

NetGear... | Answered on Mar 09, 2015

You need to set up the Wi-Fi on both the router and the PC.

It will default to the Ethernet connection, so don't forget to remove the cable if testing for wireless mode.

NetGear... | Answered on Mar 09, 2015

If the internet comes into the router, and not the DVD player, then the reason it keeps rebooting is that the internet link is going down.

NetGear... | Answered on Mar 09, 2015

On the label at the back of the router.

NetGear... | Answered on Mar 09, 2015

Check the protocol used by the router and that used by the wireless adaptor. They should be the same, one may not be possible on the other.

NetGear... | Answered on Mar 09, 2015

Look on the label at the back of the router.

NetGear... | Answered on Mar 09, 2015

Not finding what you are looking for?
Computers & Internet Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers


Level 3 Expert

13434 Answers


Level 3 Expert

4363 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WG NetGear

  • WG NetGear

Most Popular Question

wireless network adapter not working

  • Computers & Internet