20 Most Recent Maytag Neptune MAH6500A Front Load Washer Questions & Answers

That is Failed Lock. If the door is not completely shut and the lock can not engage after several attempt you will get this code.

Maytag Neptune... | Answered on Apr 03, 2016

I rented the tool and it worked fine. The replacement steel washer had an extra rubber insert that took me a few assemble/test/disassemble cycles to find. That cost me time and the $90 late surcharge on the rental. All told though, it went as described online and in the dvd that came with the rental. Just see that the replacement parts fully match what you are replacing.

My question is whether someone else has done this and had the new bearings last more than a couple months. Two and a half months in, the washer is winding up as when the first bearings went bad. This is not a good sign, and I question the quality of the bearings.

Any feedback?

Maytag Neptune... | Answered on Aug 07, 2015

quite often it will be the door switch has failed

Maytag Neptune... | Answered on Jun 16, 2015

I would check the balance of machine by using a leveler and checking the bottom leg adjustment on all 4 legs then check the
suspension springs, counter weights, dampning straps etc.








Maytag Neptune... | Answered on Jun 11, 2015

The problem is that the seals are leaking and allowing water to attack the tub bearings.
You need new tub seals and bearings.....not as difficult as it may seem.
see u tube video on replacing maytag seals and bearings
Cheers Stan

Maytag Neptune... | Answered on Apr 02, 2015

change capasator

Maytag Neptune... | Answered on Mar 03, 2015

Remove the screws holding the door on , pull the door up and off then remove the two opposite side screws, pull the front panel off.you will see a metal bracket on each side that hold the top on remove those , now you should be able to get the switch

Maytag Neptune... | Answered on Aug 02, 2014

Check the door switch.

Maytag Neptune... | Answered on Aug 02, 2014

Is this unit brand new or has it been run before. Make sure the cycle is finished and power is off should open up. I if not unplug unit wait about a minute and then plug in again then try. Reset any fault .then try.

Maytag Neptune... | Answered on Aug 02, 2014

Your Maytag Neptune MAH6500A Front Load Washer has dimensions:

Width : 27"
Depth : 29"
Height : 42 1/2"
Capacity : 3.34 cu. ft.


Maytag Neptune... | Answered on May 22, 2014

Not finding what you are looking for?
Maytag Neptune MAH6500A Front Load Washer Logo

230 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

606 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Brad Brown

Level 3 Expert

18166 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neptune Maytag

  • Neptune Maytag

Most Popular Question

water coming out bottom door

  • Washing Machines