20 Most Recent Panasonic TC-32LX60 32 in. LCD Television Questions & Answers


I suggest that the power supply may have failed

Panasonic... | Answered on Jan 18, 2018


Good day,

I am reading that this is a circuit failure. I would refer you to a technician to repair/replace the board.

Good luck...

Panasonic... | Answered on Dec 04, 2017


Ours is doing the exact same thing! I came here hoping to find an answer. Did you figure your tv out?

Panasonic... | Answered on Mar 13, 2015


Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and precious time.

Panasonic... | Answered on Aug 11, 2014


What kind of cables are you using to hook up the DVD to the TV? Are they they composite, component, or S-Video? What are the connectors you're plugging both ends of the cables into labeled? Are you plugging the audio cables into the TV or directly into the sound system?

Panasonic... | Answered on Jun 23, 2014


can you get sound from the back RCA connectors (red and Yellow ) to a sound bar. if yes I have see a-lot of TV off the line that the connector at the bottom of the MAIN board is disconnected....

Panasonic... | Answered on May 25, 2014


6 times flahes denotes main power regulator board fault. Check for it. To get some information, http://electronicshelponline.blogspot.com/Pull up older posts. Blinking code details to Panasonic Plasma TVs are given.

Panasonic... | Answered on Dec 03, 2013


DON'T wiggle it anymore because the connection solder points are loose and you will eventually crack the connector or the PCB it's soldered to. If it is not to much hassle you can remove the TV/Case cover and hit the points with a soldering iron.

Panasonic... | Answered on Nov 11, 2013


Thank God for the internet. I had the same problem and I googled it and found this site with this solution. It worked fine. Thank you. Like you said, unplug, hold the power button for 60 seconds and replug and turn on. Worked like a charm. Thanks a bunch.

Panasonic... | Answered on Jun 19, 2013


Most likely is the LCD panel hit by something and damaged. It possible costs you more to fix it than to buy a new one.

Panasonic... | Answered on Jul 26, 2012

Not finding what you are looking for?
Panasonic TC-32LX60 32 in. LCD Television Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Televison & Video

  • Panasonic Televison & Video

Most Popular Question

no power but red light flashing

  • Televison & Video
Loading...