20 Most Recent HP vs19 (Silver) 19" LCD Monitor Questions & Answers


You did all the correct diagnostics and proved that the monitor is faulty. Take to a local service centre for repair.

HP vs19 (Silver)... | Answered on Feb 23, 2018


why not test the monitor on another PC
works there good.,
if not the monitor is bad.
can be monitor bad, cables bad, power pack if fitted bad.
test it on another PC.
win
if bad monitor start a post how to fix a bad monitor (endless answers)

HP vs19 (Silver)... | Answered on Mar 22, 2017


If this monitor (HP w1907) is going into sleep mode the normally blue power led will change to yellow. This indicates loss of video signal or possible out of range resolution. If the picture goes dark and the power lite stays blue, you have a backlight malfunction. It can be an inverter power fault but this model mostly has worn out backlights causing a shutdown condition.
Monitor Mike

HP vs19 (Silver)... | Answered on Jun 25, 2013


This can be done in the menu on the monitor. There should be a button that says menu. push that and sub menus will come up. There should be a choice for brightness. Most of the selections are then adjusted using the volume buttons Up or Down.

HP vs19 (Silver)... | Answered on Jan 21, 2013


Hi There
The Monitor setting you set through the computer, may you select the sleep mode or hibernate.
Basically there is no any external fuse. so don't find that one.
Thanks http://pacificbits.ucoz.com/

HP vs19 (Silver)... | Answered on May 09, 2012


take it to any Monitor technician or service. It has image output problem in it or a IC is damaged.

HP vs19 (Silver)... | Answered on Aug 28, 2011


try changing the video card of your computer..

HP vs19 (Silver)... | Answered on Aug 18, 2011


Hey there.
I have recently written a tip on this OSD lockout problem. I suggest you give it a read and let me know how it goes.
You can see my tip here: http://www.fixya.com/support/r9424404-fix_osd_lockout_or_screen_display
Enjoy my tip.
Slasher_X

HP vs19 (Silver)... | Answered on Aug 14, 2011


Hi,

I am sorry to hear regarding the trouble. This is a common problem with HP monitors and we have discussed the same in length in many forums and blogs. There are 2 main reasons for the same :-

1. There is dust accumulated inside the Menu button which makes a short circuit and so you repeatedly get the Display Menu. You can resolve this by opening up the monitor panel and blowing away the dust with a compressed air can. Do NOT use hot air blowers. Also try to clean up the circuits with a very soft dry cloth.
Caution: First unplug the monitor and leave it without power for 2-3 hours before performing above procedure.

2. This is a common issue that happens when a particular IC (integrated circuit - Chip) goes bad either because of manufacturing defect or age. So if step 1 does not resolve your issue than the only option is to get the monitor replaced from HP if it is under warranty. If it is not in warranty don't even think of getting it repaired as that will cost you much more than buying a new monitor.

To open the monitor, you need to unscrew the screws on the back side or they might be hidden under some panel.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

HP vs19 (Silver)... | Answered on Jul 04, 2011


You need to try it with another PC first to make sure it is not the PC problem. This model is known to have bad caps and bad lamp assemblies.
See my pictures here: http://s807.photobucket.com/albums/yy352/budm/HP/HP%20VS19D/

If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

HP vs19 (Silver)... | Answered on Jun 30, 2011


WHERE IS THE MENU BUTTON

HP vs19 (Silver)... | Answered on May 30, 2011


Press and hold the menu button for about 10 seconds.
The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock displays for ten seconds.

Hope this helps. Any vote will highly be appreciated. Thanks =)

HP vs19 (Silver)... | Answered on May 30, 2011


Check the caps and fuse in the power supply section first.
See pictures here:
http://s807.photobucket.com/albums/yy352/budm/HP%20VS19D/
Hopefully it will not have bad lamp assemblies later on.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

HP vs19 (Silver)... | Answered on Jan 04, 2011


More likely to have failed power supply due to bad caps.
If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed HP monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

HP vs19 (Silver)... | Answered on Dec 25, 2010


this problem can happen if the vedio cable is loose or bad. take the the back off panel get the vedio cable make sure its pluged in tight if it is and you still have the problem price and consider replacing the cable

HP vs19 (Silver)... | Answered on Dec 19, 2010


Yes, close by the AC inlet as shown in my pictures here:
http://s807.photobucket.com/albums/yy352/budm/HP%20VS19D/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

HP vs19 (Silver)... | Answered on Dec 11, 2010

Not finding what you are looking for?
HP vs19 (Silver) 19" LCD Monitor Logo

Popular Tags

99 questions posted

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Toby Lee
Toby Lee

Level 3 Expert

409 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Computers & Internet

  • HP Computers & Internet

Most Popular Question

not ge rid

  • Computers & Internet
Loading...