20 Most Recent Copystar CS 1415 Laser Printer Toner Cartridges Questions & Answers

replace your toner, your toner is not compatible with that machine

Copystar CS 1415... | Answered on Jul 08, 2013

if this were your problem it would be obvious the inner tray is in the middle of the machine there is a lever that lifts up as paper stacks up its probably stuck in raised position

Copystar Office... | Answered on Nov 14, 2019

This code is a high temperature in the fuser unit. The reset process is as follows, enter 1087-1087-163-print button-execute-print button then shut machine off when the message comes up on the display. The machine should clear the code and reboot, if the code returns you will need to contact a service company for further assistance. Hope this helps.

Copystar Office... | Answered on Sep 11, 2019

Press 1087, 1087 until the machine shows U000 self status, press 163, press start and then scroll to execute and then press enter. the machine will iunitialize and come ready for copying

Copystar Office... | Answered on Apr 27, 2019

You first need to pull the fuser out and manually check that it is running smoothly. More times than not, it will be the fuser rather than the motor.

If the fuser is fine, locate the motor then turn the machine on and visually inspect. If the motor does not run before the code pops up then replace it.

Copystar Office... | Answered on Mar 22, 2019

Bad Hard Drive

Copystar Office... | Answered on Mar 14, 2019

Paper jam in the paper cassette

Copystar Office... | Answered on Mar 14, 2019

There is still a jam inside the copier

Copystar Office... | Answered on Mar 14, 2019

Sounds to me like you need a developer change and these machines must have OEM toner

Copystar Office... | Answered on Mar 03, 2019

By calling a service agent and arranging a repair visit

Copystar Office... | Answered on Oct 10, 2018

try 1087 1087 then 20 and 21

Copystar Office... | Answered on Apr 28, 2017

1087 1087 then 201 push little crosses with pen tip

Copystar Office... | Answered on Apr 28, 2017

try youtube or google iys hard to explain you have to remove the gray

Copystar Office... | Answered on Apr 28, 2017

it is the touchscreen

Copystar Office... | Answered on Apr 28, 2017

Make sure your default settings are for AUTO paper selection and 100% magnification to start. That is the most common default settings. Then, under "Zoom" change to AUTO magnification and under PAPER SELECTION specify Letter (either landscape or portrait). Now when you copy a legal original (8.5" x 14") it will be reduced at 78% to fit it on an 11" sheet. An alternative is to use "X-Y" zoom. Now you can stipulate 78% for the "X" dimension and leave the "Y" dimension at 100%. You will want letter size paper to be feeding lengthwise (portrait). Now you can copy legals and the image is reduced top-to-bottom only, leaving it much more readable.

Copystar Office... | Answered on Jun 20, 2016

Not finding what you are looking for?
Copystar CS 1415 Laser Printer Toner Cartridges Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts


Level 3 Expert

1363 Answers

Tammie Duggan
Tammie Duggan

Level 2 Expert

57 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Copystar Office Equipment & Supplies

  • Copystar Office Equipment & Supplies

Most Popular Question

copying half page

  • Office Equipment & Supplies