20 Most Recent
Questions & Answers
Oregon Scientific Stark clock resets itself to PST.
-Press SELECT once and time number should flash.
-Press and hold SELECT and it will enter settings mode for the clock.
-At the bottom of the screen next to the moon phase you should now see PST time zone.
-UP and DOWN keys will change the time zone.
-Press SELECT and other clock settings can be changed.
on Nov 10, 2016
Starck clock wrong time zone
-Make sure clock is in radio sync mode. This is in the manual so won't repeat here.
-Press & release SELECT. Clock time numbers should flash
-Press & hold SELECT. It should enter clock settings mode
-Bottom of screen next to moon phase you should see the current time zone. PST after reset
-UP & DOWN will move through time zones.
-Press & release SELECT when done.
-Each time SELECT is pressed will move to a new setting like 12/24 hour etc.
-Press SELECT until clock numbers stop blinking or leave it alone to return to normal mode
-This should also work on the other Oregon Scientific Starck models.
on Dec 21, 2009
Oregon jm828wfu stopped working, no display
Mine did the same. Remove 4 phillips screws from the rear. Carefully open and expose the innards. Remove 6 smaller phillips screws from the black box exposing the battery bay. Pull out the tiny battery tension spring and clean the contacts. Refit in reverse of removal. Refit batteries- worked OK for mine.
on Dec 09, 2015
Not finding what you are looking for?