20 Most Recent Konica Minolta Bizhub C 6501 Color Copier,ic 408,bizhub 6500,only 442,000 Copies Questions & Answers


same thing yellow charge assy

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 24, 2018


Check the yellow drum charge assy. remove and install ensure properly installed, is the long screw that holds the middle section ******* in?? just below the front operation panel might also be a HV board problem or the charge assy. is not making good contact.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Apr 28, 2016


replace the trim waster with a new one

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 14, 2016


had a circuit board replaced recently??? if so check each and ever connection, pull each connection and reseat each connection one at a time while each connector is removed check all pins for a bent pin. Or replace the Print control board, Interface control board, image control board, and the overall control board, $$$$$$$$$$$$$$$$$$$$$$$$$ more then what you paid for the machine!!!! Then you will still have to remove each connection and reseat them and look for bent pins!!!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 25, 2015


Could not find a Error code c-6508. But I did find a paper jam 65-08. Check you document feeder there is a jam paper or sensor problem (PS302).

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 16, 2015


Check the yellow drum and or the yellow developing unit

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 09, 2015


Check the yellow drum and also check the yellow developing unit.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 09, 2015


developer Y

Konica Minolta... | Answered on Dec 23, 2013


Any reset will wipe the memory and network settings so I would recommend you have tech look at it and see if you can save all setting before wiping clean

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered 3 days ago


Need to access service mode to enter serial number if you don't enter correctly then machine will lock out. I recommend you have a tech do this.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 15, 2020


Your email server is miscfgigured

Konica Minolta... | Answered on Dec 02, 2019


C2552 generally shows Cyan Developing poor toner ratio...

Please let us know Which Model??

Konica Minolta... | Answered on Nov 26, 2019


Sir/Mam,
Turn off the main power switch, ensure the sub power switch is on. The sub power switch is located on the right side of the control panel. Then holding down the Utility/Counter button turn the main power switch on. Close the front door you must keep the Utility button down. The screen will show TROUBLE RESET touch it sees a "OK" then power off the machine. YOU MUST WAIT TEN SECONDS BEFORE POWERING UP AGAIN!!!!!! If the problem goes away OK. If the code comes back, you need a Fusing unit ( DO NOT KEEP TRYING TO RESET THE MACHINE! THE MACHINE IS TELLING YOU THERE IS A PROBLEM!!!!! A Fire could occur and that would ruin a perfectly good day!!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Nov 24, 2019


A search using https://www.google.com suggests the following:

  • Code: C-2401
  • Description:The erase lamp (EL) is unconnected.
  • Causes:Erase lamp (EL)

https://printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20601&code=C-2401

Web site above includes a link to a service manual.

Konica Minolta... | Answered on Nov 22, 2019

Not finding what you are looking for?
Konica Minolta Bizhub C 6501 Color Copier,ic 408,bizhub 6500,only 442,000 Copies Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6862 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

carpediemweb

Level 1 Expert

51 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Konica Minolta Office Equipment & Supplies

  • Konica Minolta Office Equipment & Supplies

Most Popular Question

solve code c2861

  • Office Equipment & Supplies
Loading...