20 Most Recent Samsung LN46D630 46 inch LCD 630 Series TV - Page 6 Questions & Answers


You can either GOOGLE THE MODEL NUMBER WITH SERVICE MANUAL or contact Samsung to see if available.

Samsung LN... | Answered on Mar 19, 2012


The cost to repair this problem is about $400-500 depending on local labor rates.With new flat screens as low as $500.00 it doesn't make sense money wise to repair it, this is especially true if the TV is more than 4 years old, flat screens last about 6 years at most before problem s start like burnt out back light bulbs (another $400.00).

Samsung LN... | Answered on Jan 16, 2012


go into input or source make sure HDMI is connected to source make sure plugged into a in port

Samsung... | Answered 4 hours ago


Here is a question that we see often.
Question: I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ?
So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what is does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part your put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'No Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous use it as an excuse to get money for selling items that may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $2 parts and an hours labour.

Samsung... | Answered 10 hours ago


You will have to find out what is causing the equipment to be in protect mode, then fix it to restore normal operation.

Samsung... | Answered Yesterday


Only a service-manual and soldering tools in this case can give results how are the fpc connectors and circuits connected to the screen also a little repair suggestion = to see here much problems caused by wet cleaning the screen and sometimes build-up heat by sun rays or bad airiation.

Samsung... | Answered Yesterday


Get an LG.. went through TOO many Samsungs.!!

Samsung... | Answered 2 days ago


That's impossible unless is it possessed by the devil. If it is unplugged, there is no power to it. It has no internal battery apart from a tiny one on the motherboard to keep its memory. It is more likely to be a carbon monoxide alarm or similar. See the link.

https://www.google.com/search?q=Samsung+TV+keeps+beeping+about+every+30+secs

Samsung... | Answered 2 days ago


try changing input or source if ok try audio settings

Samsung... | Answered 3 days ago

Not finding what you are looking for?
Samsung LN46D630 46 inch LCD 630 Series TV Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LN Samsung

  • LN Samsung

Most Popular Question

connect bose solo 2009 samsung tv

  • Televison & Video
Loading...