20 Most Recent
Kenmore Oasis HE 27082 Top Load Washer Questions & Answers
3 Answers
Clothes coming out with stains they didn't have - looks like oil/grease
Front load greasy residue ,
Due usually to much detergent in each load, use smaller amounts.
To much detergent degrades the rubber seals and gaskets and rubber seal also in some front loaders around the door too!
Over the life of a front loading washer the seal/gasket degrades
largely due to the chemicals in the detergent as well as bleach.
Most gaskets/seals get hard and brittle therefore the over the life of a front loading washer
the seal/gasket degrades largely due to the chemicals in the detergent as well as bleach.
....please rate this ....thanks
Kenmore Oasis HE...
|
Answered
on Sep 19, 2019
27 Answers
Kenmore Elite Oasis HE top load washing machine F1 code
Ok so you will all love this answer. Not only do I own this set but I also sell them at sears in des moines, ia. Ok so there was a recall on the controll boards it's fine don't be scared all you have to do is call 1800-659-7026 give them your info and model and ser.# they will then send someone out to replace the control board it takes about ten min for all of it and it is all free no matter when you bought it. But in mean time quick fix for all of you is to unplug the washer then hit power then stop over and over tell there is no power left in it then plug it back in and it will work fine for awhile you may have to repeat if it does it again. But after they come out it will work fine. yes this has happened to me it sucks it took two years to find out what was wrong they didn't even tell us I had to ask alot of parts guys and look it all up. So for everyone that this is happening to I'm sorry I just hope this gets out to all of you because I work very hard to know my product and take care of my customers ask any of them and it's not easy working STRAIGHT commission and people don't want to come back for these kind of things. But remember the reason why you came there in the first place we will give you the lowest prices in town and we know what we are talking about, well most do if not they ask me:) so I realy hope this helps someone out there.
Kenmore Oasis HE...
|
Answered
on Sep 24, 2018
2 Answers
Screen say OL on my Kenmore Catalyst Elite. What does oL mean?
OL error means the Motor Controller has sensed an Overload.
The oL code means the motor control board is struggling to power the motor up. If it recurs after removing some clothes - usually this means a new motor control.... or worse - a new bearing.
If it were a problem with the tub floating up, the unit would spin instead of nutate.
Bearing failure in this machine is very common.
I suspect the drive shaft and bearing are the problem. The bearing and shaft are part of the outer tub.
Kenmore Oasis HE...
|
Answered
on Nov 11, 2017
1 Answer
Agitator ( nutator) will not function
what is a nutator?i found one time that there's a gear under the agitator that wears and the agitator doesn't move,remove the agitator and you'll see a part with 6 screws in it under that is the part you need to change part
W10820039
Kenmore Oasis HE...
|
Answered
on Nov 11, 2017
12 Answers
Washer keeps giving me a "F51" error code? What do I do?
I placed a very detailed post on how to resolve this issue. If you are mechanically and electrically inclined, this will give you pretty much step by step directions. I also analyzed why this is happening.
Please disconnect power before any work... There is 120V floating around inside to bite you!
Good Luck,
GBaxter
http://worldofwashers.blogspot.com/2007/06/cabriooasis-f51-error-codes.html
Kenmore Oasis HE...
|
Answered
on May 02, 2017
2 Answers
F1 & F51 error on my Kenmore Elite Oasis HE washer
Normal
0
false
false
false
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Good
news for Oasis F-51 sufferers! Sears
will replace the electronic control board (the F51 prob) for free, in warranty
or not. Serial #s for the bad board are: CS48 - CS52 or CT01-CT49. Call Sears
at 800-847-9083.
You
hv to rate me ‘very helpful’, or the call won’t get thru!!
Kenmore Oasis HE...
|
Answered
on May 02, 2017
2 Answers
Cycle Signal Won't quit beeping
This is a common problem with the Oasis. The problem is with the interface control board in the console, and/or wiring harness to the board. I have repaired three of these problems in the last 6 months and it was the interface control board each time. The machine will still function normally except for the annoying noise. I don't know of an easy way to defeat the noise functions to the interface control board, or if it should even be attempted. You could cause more harm than good. It can be a bit pricey to replace, and can be tedious to remove. If you wish to attempt to repair, let me know and I can give you some step by step tips on how to remove.
Kenmore Oasis HE...
|
Answered
on Apr 01, 2016
3 Answers
My Kenmore Oasis HE is
Sears has a recall for the Kenmore Oasis washer. I have the exact same problem. Call Recall Line @ 1-800-659-7026 with Model number and serial number. The part is a control board that works with the spin cycle.
Kenmore Oasis HE...
|
Answered
on Apr 01, 2016
2 Answers
LF Error Code
How is the water filling? Slower than it should?LF (long fill) Start by removing the hot & cold hoses off the back of washer ,now look inside the valve for clogged screens,if they are clogged ,clean them.If problem continues replace the water valve.
Kenmore Oasis HE...
|
Answered
on Mar 12, 2016
Not finding what you are looking for?