20 Most Recent Ultra Linear UL-1018W Car Subwoofer Questions & Answers


At the back of the car in the boot there is a Cover on the side. Take that off and you will see a wire's There will be a white Connector that is this is the Aux port and AV port. I made RCA connections on them and works fine. Can not do video when driving which is a pain. email if you want info as i have it on a Word Doc, I have the same car.

Car Audio &... | Answered on Dec 02, 2019


Removal of the player is the first step. Now, you have to disassemble it sufficiently to get the errant disc back into the magazine. You will want to remove the magazine after the disc has been returned to check for damaged parts. Otherwise, the problem will happen again.

Car Audio &... | Answered on Nov 30, 2019


The most common issue I had is ground wires, I would also suggest changing it as quickly as possible. The other problem I had is adjusting a GPS navigator for my motorcycle. For this I would recommend checking this page https://yourmotobro.com/best-motorcycle-gps/ because some models require more than just adjusting a pair of screws on handlebars.

Car Audio &... | Answered on Nov 28, 2019


Neither can we. Can you please give us more detail about what it is that you received, and in what context?\

Car Audio &... | Answered on Nov 27, 2019


Good question. Can you tell us in more detail what you are asking about? The device, make and model, and what you are trying to do?

Otherwise there are dozens of different meanings of PSM
https://www.fdot.gov/environment/psmcodes.shtm
https://www.ibm.com/support/knowledgecenter/en/SSWRCJ_4.1.0/com.ibm.safos.doc_4.1/InstallPlan/Configurestep_installvmpsm.html

https://en.wikipedia.org/wiki/PSM

Car Audio &... | Answered on Nov 27, 2019


There is a reset button on face or behind detachable that requires a pin point to press 90% of the time this is a fix

Car Audio &... | Answered on Nov 22, 2019


My car (2005 Honda CRV) was shipped overseas and the radio asked for a code. After several tries, I searched the internet for a solution. Apparently Honda now allows you to obtain the code through their provided website. You will need the VIN #, the phone number and zip code that is on file when you purchased the car. Our car was purchased used and did not come with a manual. When I went to enter the code in I had already entered too many tries, now it reads ERROR E.

However, even before having the code (as well as now that it reads ERROR E) I can get the radio working. Push in preset buttons 1 and 6 and push in the power button simultaneously. A long number appears - at that point I pushed preset button 2 and the radio operated normally. Unfortunately, I do need to do this each time I turn the radio on.

Car Audio &... | Answered on Nov 22, 2019


If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ Unlock procedure, override the password lock and to set the device region free procedure of many popular brand TVs and other devices are given

Car Audio &... | Answered on Nov 17, 2019


The Q factor does have to do with tones and pitches of your music. This determines a Quality factor of how pitches are placed (high tones, low tones, and mid tones) and using the Q factor will use a preset setting to put the tones at a high proformance audio.

Simple test and trick for you.

  1. Put in your favorite cd.
  2. Turn on the Q factor
  3. Play a song and listen to it for atleast 45 seconds
  4. turn off the Q factot
  5. Play that same song for atleast 45 seconds
  6. Now you determine if the quality used by the Q factor is better or worse

For some songs that have close pitch audio, it may not be as noticeable, so you can repeat and test. Give it a try, because then you can understand it more by hearing then reading. Its all about how you want it to sound. Good luck

Thank You

Car Audio &... | Answered on Nov 14, 2019


You need to press refresh to see your answer posted :>) You had three posts, I deleted one of them.

You can't do that! The headlights on a car draw too much current to use a toggle switch. You will burn it out a less than a week. Headlights need a switch and a relay. Fix what you have, don't try new hacks.
Posted on Nov 07, 2019

Car Audio &... | Answered on Nov 07, 2019


You can't do that! The headlights on a car draw too much current to use a toggle switch. You will burn it out a less than a week. Headlights need a switch and a relay. Fix what you have, don't try new hacks.

Car Audio &... | Answered on Nov 07, 2019

Not finding what you are looking for?
Ultra Linear UL-1018W Car Subwoofer Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Ultra Linear Car Audio & Video Experts

Professor_V
Professor_V

Level 2 Expert

93 Answers

FastHarley
FastHarley

Level 3 Expert

751 Answers

brian williams

Level 3 Expert

1728 Answers

Are you an Ultra Linear Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ultra Linear Car Audio & Video

  • Ultra Linear Car Audio & Video

Most Popular Question

ultra linear ul600hc gain pot broken off

  • Car Audio & Video
Loading...