20 Most Recent Canon PIXMA MP810 All-In-One InkJet Printer - Page 4 Questions & Answers


I'm certain there is a fuse, probably on the power supply board, to protect against the possibility of fire. Unfortunately, these are not normally user replaceable as they are often 'micro' fuses in a cylindrical case ~ 1/4" in diameter. Another type looks a lot like a low-power resistor with leads at either end. Both of these are soldered onto the board and normally aren't visibly blown but have to be checked with a meter for continuity.

Canon PIXMA ... | Answered on Jun 25, 2011


Ok IF you have performed all those tests and done exactly as you say, then i can say 100% for sure that the printer has faulty electronics. I have seen this type of symptom countless times in my shop over the years and always indicates the internal electronics, often but not always the USB interface port electronics, but it can be anything in fact.
You will have to be careful as to repair as the cost of such, will/may quickly rise to the cost of a new printer with a warranty.
get it looked at by the professionals ask FIRST for a "Quote" ONLY and go from there if costings are acceptable, else get a new unit.

Canon PIXMA ... | Answered on Jun 16, 2011


Hi
This maybe a small bit of paper in the rollers somewhere you need to find it or it is need of a good clean.

You can also try this.

Solution 1:
Clean the timing strip.

Solution 2:
The purge cap (the white sliding mechanism that the print head parks to when it's not in use) may be not lubricated well enough .

Lubricate the sliders with some white grease (don't get it on the small wipers or the black caps); this repair probably require to remove the right panel off of the printer to gain access to the purge mechanism.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Canon PIXMA ... | Answered on Jun 04, 2011


Are you sure that there's no tiny piece of torn paper left inside the machine? It's very difficult to get all of it out if paper comes out in bits.

Canon PIXMA ... | Answered on May 27, 2011


It means scanner locked

action:

Slide the lever to lock the scanner in the open position, turn off and turn MFP

Canon PIXMA ... | Answered on May 24, 2011


Hi

First of all please make sure that all the cables from/to the printer are connected properly. Now please use different power socket to make sure that the printer is getting power. If so then we can reset the printer. To reset the printer unplug it from/to the power socket and mains and let it sit without power for more then 10 minutes and then replace all the cables and print a test page. If still the issue is not resolved then you'll need to replace the printer cable. Hope this helps...please post back for further assistance.

Daniel

Canon PIXMA ... | Answered on May 20, 2011


You could purchase a ethernet print server which will allow you to connect your printer to the router via ethernet cable. I recommend the TPLink TL-PS110U. I use this for one of the printers in my office.

http://www.tp-link.com/en/products/prodetail.aspx?mid=0103030802&id=194


Alternatively, you could purchase the TPLink
TL-WPS510U. This is a wireless print server. It will give you some freedom if you wish to locate your printer to somewhere other than beside your router.

http://www.tp-link.com/en/products/prodetail.aspx?mid=0103030801&id=181

Canon PIXMA ... | Answered on May 07, 2011


For installing a wireless printer on Windows XP, wireless router is an essential device.

Follow the recommended steps mentioned on the installation CD of the router, and set-up a wireless network.

Since several computers or laptops will access the printer, it0 1is recommended to connect the wireless printer to the main computer through the USB port.

To begin the installation process on Windows XP, access the network setting in the Control Panel, and activate the file and printer sharing option in the LAN setting.

This will allow the operating system to recognize the availability of a wireless printer.

Now, click the Start button, go to Devices and Printers, select Add a Printer option.

Click the second option- Add a network, wireless or Bluetooth printer.

The computer will search for available printer and reflect it on the screen.

Click Finish; and the printer is ready to begin the printing process.

Canon PIXMA ... | Answered on May 05, 2011


Hi,

Welcome to Fixya. Would like to know if your using a Mac or a PC? 306 error usually appears on mac pc. Please provide the information needed to be able for us to provide the solution on the issue.

Thanks

Canon PIXMA ... | Answered on Apr 21, 2011


check your ink cartridge.

Canon PIXMA ... | Answered on Apr 11, 2011


The first thing I would assume is that your are connected to this through a wireless network. I have another model of the Pixma printer and I have the same issue whenever I try to use the buttons on the printer to scan. For some reason that button does not realize where you are trying to scan to over the network and will not work. In order to scan you have to start it from the GUI, not from the printer itself. Hope this helps, if you have any more issues let me know.

Canon PIXMA ... | Answered on Apr 11, 2011


Dont go to Cartridge World :(. This problem is sometimes caused when a cartridge has been re-filled and re-set too many times, The chip corrupts and causes some very weird messages. Simply try a New Set of Cartridges (Not reconditioned or Refilled). GnL Products in NSW have new compatible cartridges for about $10 each. gnlproducts@live.com.au

Canon PIXMA ... | Answered on Apr 04, 2011


This correction is listed on the Canon website. Lock Switch Make sure to unlock the scanning unit before turning the machine on.
  1. Lift the document cover open.

  2. Slide the scanner lock switch to the release mark.


    Caution : Make sure to unlock the Scanning Unit (Printer Cover) before turning the machine on.Before transporting the machine, always lock the Scanning Unit (Printer Cover) by moving the Scanner Lock Switch towards the lock mark.


    scanlockswitch.gif

  3. Close the document cover.

  4. Press to turn off the machine.

  5. Wait approximately 5 seconds then press to power back on the printer.

Canon PIXMA ... | Answered on Mar 27, 2011


Take this link tp Canon, select your operating system from the list and select your needed drivers.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp250#DriversAndSoftware

Canon PIXMA ... | Answered on Mar 24, 2011


Try using the image capture app in your app folder, it is a bit quirky but works.

Canon PIXMA ... | Answered on Mar 09, 2011


Hello,

You may want to try the following steps:

1) Press the HOME button. Wait for about 5 seconds, select ,and then press the OK button. (2) Press the buttonto select , then press the OK button. 3) Press the buttonfour times, then press the OK button.
  • If the Bluetooth unit is connected to the machine, pressthe button five times, and then pressthe OK button.
(4) Press the or button to select the language you want to bedisplayed, then press the OK button.
=============

I hope this helps.


Best of luck!!

Canon PIXMA ... | Answered on Mar 02, 2011


Go to this WEB site to download the manual.
http://gdlp01.c-wss.com/gds/6/0900002846/01/mp810_qsg_us_v4.pdf
Page 29 gives you instruction on scanning.

Canon PIXMA ... | Answered on Feb 23, 2011


You probably have something stuck in the paper feed or under the print head.
First try moving the print head left and right with the printer off. If that doesn't work then, Try looking for jam in the paper feed and specifically under the rollers. A small piece of paper or other debris, like fallen paper clip, staple. postage stamp are things I have seen stuck in printers that cause jams and error codes.
If these solutions don't work, post comment here.
j

Canon PIXMA ... | Answered on Feb 21, 2011

Not finding what you are looking for?
Canon PIXMA  MP810 All-In-One InkJet Printer Logo

260 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2260 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PIXMA Canon

  • PIXMA Canon

Most Popular Question

changing print size canon mp 810

  • Office Equipment & Supplies
Loading...