20 Most Recent Vizio P50HDTV10A 50 in. Plasma HDTV - Page 4 Questions & Answers


this is most likely the sustainer board(s) problem. Replacing the sustainer boards should correct this problem for you. you can get the parts at vancebaldwin.com

Vizio P50HDTV10A... | Answered on Jun 14, 2014


I have the exact same problem. It may be the tuner board is bad. I did some research and it seems like this tv is junk. I saw a link that said call Vizio and they are aware of all it's problems and are willing to give a new tv free of charge. I called and they knew nothing about it, but did offer to fix it out of warranty for $285 all problems fixed out the door. Also, TV locks up on RGB input and can't switch inputs until I hooked a computer to the RGB input, then I was able to select a different input.
Please post if you found a solution to the DTV issue..

Vizio P50HDTV10A... | Answered on Jun 11, 2014


Hello, it sounds like the "y" sustain board is going bad. With the age of that set, I would not recommend spending the money to repair a set that's only a 720p set....tks...Terry

Vizio P50HDTV10A... | Answered on May 25, 2014


There is an antenna input . it is a coax connection. There is no ariel output.

Vizio P50HDTV10A... | Answered on May 13, 2014


This happens occasionally to me. Many times it is just the HD cable has partially come out from either the tv end or the device it is attached/plugged in to. Just take each end of your HD cable out and firmly put them back in. If that doesn't do the trick, try switching the HD cable out entirely, and replace with a known good HD cable.

Vizio P50HDTV10A... | Answered on Apr 25, 2014


Sounds like a power supply problem. You could just change the board , that the easiest way. If you have some knowledge of components you could look at the capacitors on the Power Supply board and if you find some leaking (brown liquid), or bulging I would change those out.

Vizio P50HDTV10A... | Answered on Apr 05, 2014


sounds like you needed to replace your video fuse before anything normally if you have video but no sound its an audio fuse and vica versa if for some reason both were out I would say your in need of a new power supply I would suggest replacing the fuse and if it still does not work contacting a service tech to run a diagnostic to see what exact part or maintenance you need

Robb

Vizio P50HDTV10A... | Answered on Jan 16, 2014


The HDTV tuner is out. Analog tuner, and video inputs work fine.
TV Model P50HDTV10A
Screen Size 50 in.
TV Manufactured Date Jan 1, 2007
Part Type MAIN UNIT
Alternate Part Type SIGNAL BOARD
Part Number 3850-0042-0150(3A)
Alternate Part Number 0171-2272-2163

Vizio P50HDTV10A... | Answered on Jan 05, 2014


Hey guess what?! After Costco shafted me good, told me to get lost, and slammed the concierge phone down, I called Vizio. THIS TV HAS A LIFETIME WARRANTY ON IT NOW!! They will fix/replace it at their expense! After a 5 minute call to their customer service they arranged the repair order. Vizio knows that this set is a lemon and they are actually owning up to it. The gentleman told me that this set now carries a Lifetime warranty on parts (to exclude a shattered screen of course) and labor! The repairman is going to come this way in the next week or so and I'll update you on what he says. So to all out there with problems on this set: CALL VIZIO AND GET READY FOR A BREATH OF FRESH AIR!

Vizio P50HDTV10A... | Answered on Dec 28, 2013


I have the P50HDTV20A. When I turn mine on I get sound but no picture but if I leave it on for about 15-20 mins and then turn off then back on it will have picture and sound. It seems as though as something has to warm up so the picture will come on.

Vizio P50HDTV10A... | Answered on Dec 11, 2013


In fact, the TV is dead. You should start troubleshooting straight from its main power regulator board itself. If you wish to get some details, check the site linked here.Pull up older posts.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product by anyone else could result in serious injury or death. If you are not familiar with electronics, do not attempt to repair.Whether you suffer fatal electrical shock.Instead, contact the nearest service center.

Vizio P50HDTV10A... | Answered on Dec 07, 2013

Not finding what you are looking for?
Vizio P50HDTV10A 50 in. Plasma HDTV Logo

622 questions posted

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Tony Nguyen
Tony Nguyen

Level 2 Expert

96 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Vizio Televison & Video

  • Vizio Televison & Video

Most Popular Question

vizio p50hdtv10a hdtv whole screen black

  • Televison & Video
Loading...