Top 20 Lexmark X1270 All-In-One InkJet Printer - Page 3 Questions & Answers


It could be that your cartridge nozzles need some cleaning. Long period of non-usage can lead to drying of ink and clogging in the cartridge nozzles. To clean the cartridge nozzles using the Lexmark software on your computer, go to Start menu > Programs > Lexmark X1200 Series folder > select Lexmark Solution Center. From the maintenance tab, select Clean to fix horizontal streaks. Your printer will then print a page forcing ink through the cartridge nozzles and clean them. Then try to print your document again to verify that the cartridges are functioning now.

Lexmark X1270... | 78 views | 0 helpful votes


Try this approach. First, uninstall the existing Lexmark X1240 printer driver from your pc.
  1. On your computer, go to Start.
  2. Go to Programs.
  3. Go to Lexmark X1200 Series folder.
  4. Go to Tools.
  5. Uninstall.
After the uninstall process, reboot your pc when prompted.
When your pc turns on, check your system if it's running on 32-bit or 64-bit. Go to Start > right-click on Computer > click on Properties. Take note of the System Type.
Use the link below and download the file that corresponds to your system type:
- Lexmark X1240 Printer Driver for Windows 7 32-bit - Lexmark X1240 Printer Driver for Windows 7 64-bit
Execute the file. Simply follow the instructions on your computer screen to complete the installation.
I hope this helps.

Lexmark X1270... | 122 views | 0 helpful votes


I presume you are using the Lexmark X1270 inkjet printer since you're posting under this model.
It could be that the printer driver on your computer is not properly installed. Try to uninstall your existing printer driver then reinstall using the X1270 driver on the Lexmark website. To uninstall, from your computer, go to Start menu > Programs > Lexmark X1200 Series folder > Tools > Uninstall. After the uninstall process, reboot your pc when prompted.
When the computer turns on, please visit the Lexmark website to download and install the Lexmark X1270 XP Printer Driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.
Try to print your document again to verify that the problem is fixed now.

Lexmark X1270... | 60 views | 0 helpful votes


Please update your printer software. Visit the Lexmark website at http://bit.ly/aKlcOJ. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.
Try to open the All-In-One Center application again to verify that the problem is fixed.
Should you still need assistance, please leave a comment to my response and I'll get back to you. Should this resolves your problem, your rating will be greatly appreciated. Thanks.

Lexmark X1270... | 96 views | 0 helpful votes


Try to reseat your cartridges into the printer. Open the printer cover and remove the cartridges. Re-brick your printer by pulling out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds. When the printer turns on, reinsert both cartridges. Try to print again to verify that the problem is fixed.
Long period of non-usage can result to drying of ink and clogging in the print nozzles. Try to clean the cartridge nozzles using the Lexmark software on your computer. Go to Start menu > Programs > Lexmark X1200 Series folder > Lexmark Solution Center. From the Maintenance tab, select Clean to fix horizontal streaks. Your printer will then print a page forcing ink through the cartridge nozzles and clean them. Try to print your document again to verify that the problem is fixed.
If this does not help, try to insert different known working cartridges or better yet brand new genuine Lexmark cartridges.

Lexmark X1270... | 53 views | 0 helpful votes


Hi,
Try downloading the printer drivers instead.Click here to download.Make sure you select the driver that corresponds with your operating system.

Hope this helps.Thanks!
Please rate this answer.

Lexmark X1270... | 104 views | 0 helpful votes


Please update your printer software. Visit the Lexmark website at http://bit.ly/aKlcOJ. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.

Try to open the All-In-One Center application again to verify that the problem is fixed.


Should you still need assistance, please leave a comment to my response and I'll get back to you. Should this resolves your problem, your rating will be greatly appreciated. Thanks.

Lexmark X1270... | 60 views | 1 helpful votes


Please visit the Lexmark website to download and install the printer driver on your laptop. First, check if your Windows 7 is running on 32-bit or 64-bit operating system. Follow the steps below:
  1. On your computer, go to Start menu.
  2. Right-click on Computer.
  3. Click on Properties.
  4. Take note of the System Type.
Click on link below to download and install Lexmark X1200 Series Printer Driver: - Lexmark X1200 Series Driver for Microsoft Windows 7 32-bit - Lexmark X1200 Series Driver for Microsoft Windows 7 64-bit

Lexmark X1270... | 379 views | 0 helpful votes


Please visit the Lexmark website to download and install the Lexmark X1270 Printer Driver on your HP laptop. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

Lexmark X1270... | 221 views | 1 helpful votes


Please visit the Lexmark website to download and install the Lexmark X1270 Printer Driver on your computer. Select your operating system, download and execute the file. Follow the instructions on your computer screen.
For the Lexmark OCR scan software, it is only available on the Lexmark installation disc that came with your printer. If you lost the disc, please contact Lexmark Technical Support Center for assistance.

Lexmark X1270... | 184 views | 0 helpful votes


This could be a printer driver issue. Uninstall the existing Lexmark X1270 printer driver on your computer. Please follow steps below:
  1. Go to Start menu.
  2. Go to Programs.
  3. Go to Lexmark 1200 Series folder.
  4. Go to Tools.
  5. Click Uninstall.
  6. After the uninstall process, reboot pc when prompted.
When your pc turns on, check if it's running on 32-bit or 64-bit operating system. Go to Start menu > right-click on Computer > click Properties. Take note of the System Type.
Use the links below to download the printer driver: - Lexmark X1270 Driver for Microsoft Windows 7 32-bit - Lexmark X1270 Driver for Microsoft Windows 7 64-bit

Lexmark X1270... | 278 views | 1 helpful votes


Lexmark has the drivers and full software for supported OS versions on their site: http://support.lexmark.com/index?locale=EN&page=product&userlocale=EN_US&productCode=LEXMARK_X1270&focusedTab=DOWNLOADS#1 . Select your version of Vista (32- or 64-bit) and then click Filter.

Click on the link and the download page should pop up. Click on Download at the bottom of the pop-up window.

If you allowed the Add New Hardware wizard to search for the drivers, disconnect the data cable and then uninstall any driver that was found. Restart your computer. Reconnect the data cable and cancel all Add New Hardware screens that open. Then run the exe that you downloaded from Lexmark.

I hope this helps.

Cindy Wells
(Note: the download probably doesn't include third-party software that may have been on the original CD.)

Lexmark X1270... | 177 views | 1 helpful votes


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer (if USB connected)> reboot your pc > unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer (if USB connected). Then try to print again once the computer fully recognizes the USB connection or when the WiFi light on the printer turns solid green (if WiFi connected.).


If that doesn't help, try the steps below:

  1. Disconnect the USB cable connecting the printer from your computer.
  2. On your computer, go to Control Panel > Printers and Faxes.
  3. Delete the Lexmark print object.
  4. Reboot computer.
  5. Re-brick your printer by pulling out the power supply - black box where the power cord is plugged into on the back of the printer, and re-plug after 30 seconds.
  6. When the printer turns on, reconnect it to the computer.
  7. Wait until your computer fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, try to print a document to verify that the problem is fixed.

Lexmark X1270... | 57 views | 0 helpful votes


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print/scan again.


Lexmark X1270... | 185 views | 0 helpful votes


Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:


1. Remove the sheets of paper from the feeder.

2. Grab a flashlight and look inside the feeder for any debris or foreign objects.

3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.

5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.

6. If cartridge area is clear, close the cover.

7. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

8. When the printer turns on, reinsert the cartridges and load some paper. Try to print a document again to verify that the problem is fixed.

Lexmark X1270... | 71 views | 0 helpful votes


Le pilote d'imprimante Lexmark X1270 pour Windows 7 est disponible au téléchargement dans le site Web de Lexmark. D'abord, vérifiez si votre Windows 7 fonctionne sur le type de système d'exploitation 32-bit ou 64-bit. Sur votre ordinateur, allez dans le menu Démarrer> clic droit sur Ordinateur> prendre note du type de système.
Utilisez les liens ci-dessous pour télécharger le pilote de l'imprimante: - Lexmark X1270 pilote pour Windows 7 32-bit - Lexmark X1270 pilote pour Windows 7 64-bit
Note: Ceci est traduit en utilisant translate.google.com.

Lexmark X1270... | 282 views | 0 helpful votes


Hi........

Choose you Operating System and download software from here

Click here


I hope this solution will helpful for you
Please don't forget to click on Four thumbs which are given below & then write testimonial for my appreciation if it is helpful
THANKS & Keep Using fixya

Lexmark X1270... | 243 views | 1 helpful votes


Scanning documents to PDF file on your Lexmark X1270 printer requires the Lexmark OCR scan software installed on your computer. If you don't have the installation disc that came with your printer, please contact Lexmark Technical Support Center for assistance.

Lexmark X1270... | 108 views | 0 helpful votes


Please visit the Lexmark website to download and install the Lexmark X1270 Printer Driver on your computer. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

Lexmark X1270... | 149 views | 0 helpful votes


Hi there,
Try these: Using a Clean cloth and alcohol;
  1. Clean the maintenance station, wipers, caps, etc.
  2. Clean the bottom of the carriage.
  3. Clean the the carriage rail.
  4. And Finally clean the encoder strips
  5. After Cleaning above add two drops of oil two carriage rail


There is usually a metal bar that the cartridges slide back and forth on (carriage rail)... over time, this bar can become "gunked up"... Use alcohol pads to clean up the bar, and the surrounding area.... Clean out as much of the track as you can.

If this won't work, you can take out the carriage rail and rub it with a cloth with alcohol and add a few drops of light bearing oil. It's the bearing oil used for high performance bearings in skateboards and rollerblades. Most any light oil should work though.

Look at the bottom of the carrier and see the guide rings, check if they are loose. Get a screwdriver and take them off. Realign them and screwed it in tight. This should fix your issue.

Hope this helps.

Lexmark X1270... | 59 views | 0 helpful votes

Not finding what you are looking for?
Lexmark X1270 All-In-One InkJet Printer Logo

1,415 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

lexmark x1270 refusing print saying

  • Office Equipment & Supplies
Loading...