Top 20 Lexmark X1270 All-In-One InkJet Printer - Page 4 Questions & Answers


Please follow the steps below on how to install/replace ink cartridges on your model:
  1. Make sure the All-In-One is on.
  2. Lift the scanner unit until the scanner support keeps it open. The print cartridge carrier moves and stops at the loading position unless the All-In-One is busy.
  3. Grasp the tabs on the cartridge lids, and then lift the lids.
  4. Remove the old cartridges. Store them in an air-tight container or dispose of them.
  5. If you are installing new cartridges, remove the stickers and transparent tape from the bottom of the cartridges.
  6. Insert the new cartridges. Make sure the black print cartridge is secure in the right carrier and the color cartridge is secure in the left carrier, and then snap the lids closed.
  7. Lift the scanner unit and push the scanner support back while lowering the scanner unit until it is completely closed.

Sometimes the ink cartridge carrier won't automatically move to its loading position even when the printer is on and the cover is open. Follow the steps below:


1. Unplug the printer from the power source.

2. With the cover open, hold the solid white strip that connects from the carrier assembly to the ink cartridge carrier and gently slide the cartridge carrier to the center of the printer.

3. Remove the used cartridges.

4. Load the new cartridges. Close the cover.

5. Plug the printer back to the power source.

Lexmark X1270... | 75 views | 0 helpful votes


Try to follow the steps below to fix the problem:

1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.

Lexmark X1270... | 135 views | 0 helpful votes


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.


You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/ffZS77. Select your operating system, download and execute the file.


If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X1270... | 65 views | 0 helpful votes


It could be that the same print job is queued on your computer's Print Spooler. Please follow the steps below to resolve this issue:

1. On your computer, browse to Start -> Run and type in NET STOP SPOOLER (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.



Try to print again.



If the problem continues, please contact Lexmark Technical Support Center for further troubleshooting.

Lexmark X1270... | 104 views | 0 helpful votes


Leading cause of paper jams is debris/foreign objects that accidentally fell into the paper feed area. Please follow steps below to fix the problem:

1. Remove the sheets of paper from the feeder.
2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
3. If you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.
4. If feeder is clear, place the printer back on the table, open the printer cover and remove the cartridges.
5. Check the cartridge area for any obstructions/debris in the cartridge carrier's path or the paper path.
6. If cartridge area is clear, close the cover.
7. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.
8. When the printer turns on, reinsert the cartridges and load some paper. Try to print a document again to verify that the problem is fixed.

Lexmark X1270... | 42 views | 0 helpful votes


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Rebrick (pull out power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds).

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print again.


You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/aKlcOJ. Select your operating system, download and execute the file.


If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X1270... | 61 views | 0 helpful votes


Sorry it is not compatible with mac ,u can visit this link for windows operating systems though- http://support.lexmark.com/index?locale=EN&page=product&userlocale=EN_US&productCode=LEXMARK_X1270&focusedTab=DOWNLOADS#1 This link is from lexmarks official website.

Lexmark X1270... | 52 views | 0 helpful votes


Dear Friend,
You can search your product on the link belowhttp://support.lexmark.com/index?page=productSelection&userlocale=EN_US&locale=EN

Just be sure to look for the right product number. Good luck!!!

Lexmark X1270... | 27 views | 0 helpful votes


Hello, Skellycj

What you can do is unplug the printer from the power outlet and let it sit whilst deleting the jobs from the print queue on the PC.

On a windows machine you want to got to START, Control panel, Under printers, open up the printer and click on each task and delete or cancel, then reboot the computer.

This will ensure there is nothing in the printer queue and the printer stops printing tasks. I hope this helps you, we do hope you leave positive feedback and ratings for your free answer today.


Regards,

Rulds2008

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Lexmark X1270... | 121 views | 0 helpful votes


The best thing to do first, is to first uninstall you printer and than re-install your printer and download the newest printerdriver for Windows Vista.

Lexmark X1270... | 200 views | 0 helpful votes


What is the error code displayed on the screen?
A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Unplug and re-plug the printer into the power source to reset it.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list again, then try to print again.


You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/aKlcOJ. Select your operating system, download and execute the file.


If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X1270... | 64 views | 0 helpful votes


Please visit the Lexmark website to download and install the Lexmark X1270 printer driver on your computer. Select your operating system > download > execute the file. Follow the instructions on your computer screen.

Lexmark X1270... | 43 views | 0 helpful votes


Please visit the Lexmark website to download the Lexmark X1200 Printer Driver on your computer. Follow the instructions on your computer screen.

Lexmark X1270... | 34 views | 0 helpful votes


I regret to inform you that the Lexmark X1270 printer is not compatible with Mac operating system. It only works on Windows. Please contact Lexmark Technical Support Center to check your options.

Lexmark X1270... | 39 views | 0 helpful votes


Try to remove the sheets of paper from the feeder. If you are physically able and willing, carefully turn the printer upside down. Any foreign objects or debris that may have accidentally fallen into the feeder should just freely roll out of it. If feeder is clear, place the printer down. Open the printer cover and make sure the paper path in the cartridge area is free from obstructions. Close the printer cover. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reload some paper and try to print again.
If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X1270... | 90 views | 0 helpful votes


Before downloading and installing the Lexmark X1270 printer driver on your computer, check if your Windows 7 is running on 32-bit or 64-bit operating system. On your computer, go to Start menu > right-click on Computer > Properties. Note the System Type.
Use the links below to download and install the printer driver: - Lexmark X1270 Driver for Microsoft Windows 7 - Lexmark X1270 Driver for Microsoft Windows 7 x64

Lexmark X1270... | 133 views | 0 helpful votes


The driver file may be corrupted, try downloading the printer driver from the Lexmark WEB site.
You can download the Lexmark printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :- http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US&segment=DOWNLOAD

Lexmark X1270... | 47 views | 0 helpful votes



Most of the time this can be fixed by turning off the printer on the mains supply, leaving it for about 15secs and then turning the printer back on again.

A lot of the time a flashing status light either means that there is (or was) no paper in the printer, therefore you'll need to add some and press the paper feed button. Or the paper has jammed so you need to remove the blockage and reset the printer (turn it off and back on by the mains).
Most problems can also be solved by restarting your computer.


Regards,

Lexmark X1270... | 73 views | 0 helpful votes


Yes, go to the Lexmark website and select your model and download the relevant version of Windows for your PC.

Lexmark X1270... | 27 views | 0 helpful votes


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Unplug and re-plug the printer into the power source to reset it.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list again, then try to print again.


You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/aKlcOJ. Select your operating system, download and execute the file.


If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark X1270... | 46 views | 0 helpful votes

Not finding what you are looking for?
Lexmark X1270 All-In-One InkJet Printer Logo

1,415 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

X Lexmark

  • X Lexmark

Most Popular Question

lexmark x1270 refusing print saying

  • Office Equipment & Supplies
Loading...