- Page 7 Questions & Answers
How do i photo copy.
You can scan and copy a document (photo copy) with this printer without conecting it to a computer. These instructions are in your User Manual. If you have lost it you can download it from this WEB site.
63 views | 0 helpful votes
I want to know if
Yes. The Lexmark x1270 is a discontinued model classified as an inkjet printer. It is compatible with the #16 and #17 black ink cartridges and #26 and #27 color ink cartridge.
105 views | 2 helpful votes
When i opened my lexmark
If the encoder strip has become unseated:
1 Turn off the printer and disconnect the power cable from the back of the unit.
2 Open the printer's front cover.
3 Pinch the top of the carrier belt and gently move the cartridge carrier to the center of the printer.
4 On the back of the cartridge carrier, there is a small slot that the encoder strip fits into. Gently push the encoder strip down and back up to get it into the slot. NOTE: If the strip is completely out of the slot, it may be necessary to move it first forward and then back.
5 Move the cartridge carrier back to the left-hand side of the printer with the carrier belt.
6 Reconnect the power supply and turn the printer back on
If you need some graphical reference, please refer to this article: Printer
Cartridge Stalls or Is Blocked .
206 views | 2 helpful votes
Dont know how to use it
Hi! do u have the manual? kindly read and follow the instruction., if you don't have pls download the manual using ur browser type Manual Lexmark X1270 All-In-One InkJet Printer save... it would help... God Bless!
47 views | 0 helpful votes
I am trying to download
Unfortunately there's no Windows 7 driver for this printer, but you can still install it in compatibility mode. Download the Windows Driver from HERE
, and follow these instructions [click HERE
.] Let me know if you need further help.
Thanks for using FixYa
92 views | 0 helpful votes
My mom got a new computer with windows 7 and she
Lexmark has discontinued this printer and last Operating system supported was xp. I have found site that says that they have windows 7 drivers but have never used this site before. i would scan all the files for possible viruses just in case.
Now on contrary this Microsoft site says that windows 7 does not need drivers installed form a CD because it will automatically install what it needs. You might have to reboot after plugging in usb. I"t says it is same for 32 bit and 64 bit version.
Hope this helps.
98 views | 0 helpful votes
I have a Lexmark
quick fix for most communication errors can be achieved by resetting the
printer and/or rebooting the PC. Frequently, issues are caused simply by a
break in the signal sent from PC to printer or vice versa. Unplugging and
re-plugging the printer allows the small amount of on-board memory on the
printer to be cleared, with the result that the PC recognizes the machine properly.
Programs continuing to run in the background of the operating system (OS) can
cause the signal to be lost. Rebooting the PC ends all programs that may be
running and makes a 'clean' start, allowing the signal to be detected.
This could also be a firewall issue. Make sure to allow full
access to all Lexmark software and printer communication processes in the
program rules/permissions for your firewall.
35 views | 0 helpful votes
Pushing the copy button with
You may need to reset your printer. Unplug the power adapter from the printer.
Wait at least 10 seconds before replugging the power adapter into the printer. When the printer turns on, try to make a copy again.
70 views | 0 helpful votes
When I switch on my
I am not sure what the light pattern indicates though but try to reset your printer. Unplug the power adapter(small black box where the power cord is attached) from the back of your printer.
Wait at least 10 seconds before plugging the power adapter back in the printer. Also, check and make there are no paper jams.
69 views | 0 helpful votes
Not finding what you are looking for?