20 Most Recent Sharp LC-26SH10U 26 in. LCD Television - Page 7 Questions & Answers

1 Answer

Users manual for sharp LC-20S4-S

Check this link to download the manual.

Sharp LC... | Answered on Nov 26, 2012

1 Answer

Sharp aqous picture error

You Vertical Problem can you go to advance settings to adjust
vertical Size? Or center the picture

Sharp LC... | Answered on Nov 02, 2012

0 Answers

No puedo usar el usb en mi SHARP AQUOS LC-32D47UA

Sharp LC... | Posted on Jul 16, 2012 | Be the first to answer

1 Answer

Sharp Lc-26sb24u white screen with sound

You will get a white screen when you unplug the t-con from the main board. Doing so removes power to the LCD panel. Verify that all of your voltages from the power supply are correct. If they are, I'd look at the t-con board. It sounds like there is a problem with the t-con that is pulling down the main board.

Sharp LC... | Answered on May 11, 2012

0 Answers

Sharp Lc-26sb24u white screen with sound

Sharp LC... | Posted on May 11, 2012 | Be the first to answer

1 Answer

Problem with Sharp LC40le700un

Contact the autthorised service center for Sharp at your town.

Sharp LC... | Answered on May 08, 2012

0 Answers

Cant tune any channels in my Vivo tv

Sharp LC... | Posted on Mar 10, 2012 | Be the first to answer

1 Answer

Sharp lc 60e88un shutdown the 24v from power board no 12v

to check for led eror vol_ channel+ hold and press power switch once andrelease only power switch triangle light should come on then release the vol and channel knobs if set comes on the leds defective in screen

Sharp LC... | Answered on Mar 02, 2012

1 Answer

MY TV MENU HAS CHANGED TO A FOREIGN LANGUAGE

HI there
Start the set-up again work through to languag. There you can change back to English.
Good luck
Kolbrun

Sharp LC... | Answered on Feb 26, 2012

2 Answers

Sharp lc-32sb220u lcd tv. Green Power LED flashes steady

Okay, I found the problem. There is a problem with the
ccfl (lamp) groung PCB. Mine is completely burnt through. I am going to attempt to repair it, but will likely need to extract it from a different unit. This board is on the front right of the lx in the lamp housing behind the
lcd panel. What is happening: The inverter circuit on the power supply is detecting that one of the lamps is not lighting and it goes into shut down.

Hope this helps!
~Seth

Sharp LC... | Answered on Feb 23, 2012

0 Answers

User manual needed

Hi
I have the manual with me in pdf format .I dont remember from where I downloaded the manual. If you can provide your email address Then i will sent you the manual. Its not possible to upload through fixya. Or you can contact me on my email address. ajingopakumar@yahoo.co.in
OK

Sharp LC... | Answered on Dec 17, 2011

2 Answers

My old tv sharp valeo 21v-r8om wont start when power is on TIMER OVER..ENTER SECRET NO..and if i enter a 4 digit no.it will apper wrong code...then it will shut off automatically

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Unlock procedure and to override the password lock of many popular brand TVs and other devices are given. Search the site by type in this key phrase "How to unlock television"; in the search box at the top left of the display window, to get gathered related posts.....

Sharp Televison... | Answered on Dec 06, 2019

1 Answer

Hi, I’m having an issue with my Sharp Aquos TV and have got an error code, it is K (in a yellow box) LC-B32CH6021KB, I’ve reset the tv a couple of times and it works fine until you turn it off. Upon turning it on again, I have the same error message. Any help is appreciated.

It sounds like in the internal battery on the motherboard has failed and is not keeping its memory. I found this;

I had this problem as well guys. Just found a fix thought i'd share.

I simply went into menu>setup>reset . This will perform a factory reset, and you shouldn't have that K or the volume problem anymore.

I tried all the fixes involving volume- input- nothing worked. I tried volume- ch- but that K never changed colours.

It all came down to a simple menu option reset.

Sharp Televison... | Answered on Dec 03, 2019

1 Answer

How to unlock control panel on a sharp model LC c323 7u without a remote

Hi Chris-
I found this link.
https://content.abt.com/documents/37621/LC60LE830U_manual.pdf
It's for various Sharp AQUOS LC models. However, on page 35 of the manual, it talks about the "Operation Lock menu". On page 25, it talks about "Using the touch sensor panel of the main unit" instead of using the remote.

Hope this helps.

Sharp Televison... | Answered on Dec 03, 2019

1 Answer