Sharp LC-26SH10U 26 in. LCD Television - Answered Questions & Fixed issues


After reading your post I can't understand what are you doing and what you expect to achieve

Sharp LC-26SH10U... | Answered on Mar 07, 2018 | 57 views


Test: You might see a pic by shining a bright light against the screen. (Halogen can burn a spot if too close for too long like 15 seconds). If so, you probably have an inverter, backlight tube or coil/driver board problem. Some of these units have a bad ground on the tube driver coil board which can be shimmed and/or tightened. Sometimes a simple car light tester (continuity tester with a 12v bulb) from casing/mount ground to any of the negative (upper usually) side of the backlight driver coils will light the screen and reveal if and which tube is non functional. I leave one dome light running in such ground position one of my TVs at all times for regulation and night dimming.

Sharp LC-26SH10U... | Answered on Feb 28, 2011 | 90 views


I have this same model TV & am using it as a second computer monitor. I have mine running through an HDMI connection on input 4. I will mention it runs at 1280x720 recommended. I'm not sure if it's the display or just my video card, but mine can handle UP TO 1920x1080. Something to note, however, is that the TV has a natural refresh rate of 60 Hz. Check your video settings that they can handle that (or at least an even integer thereof). My card (ATI HD 5750) is running it at 30 Hz with some minor issues.
Final point: if you want the sound to pump out of your TV as well, remember to change the default sound device in your volume control panel.

Sharp LC-26SH10U... | Answered on Dec 29, 2010 | 172 views


This television would benefit from an hdtv indoor outdoor amplified antenna not obstructed by trees, aluminum, bricks, and etc. Make sure the signal type is air and not cable and complete a channel scan during primetime tv hours after connecting to this antenna. Buy a large one that you can mount to the wall usually in a large flat box on the shelf in the store. Philips has one sold at Walmart.

Sharp LC-26SH10U... | Answered on Jun 07, 2010 | 1,600 views


its probably the motheboard. i got one for sale cause i broke the screen. or you can sell me yours so i can fix mine. if your interested email me at quoc5539@msn.com

Sharp LC-26SH10U... | Answered on Oct 25, 2009 | 273 views


its the motherboard. i got the same tv with cracked screen. i can sell you the motherboard for cheap or i will buy your lcd to fix mines. if interested email me at quoc5539@msn.com

Sharp LC-26SH10U... | Answered on Oct 25, 2009 | 1,075 views


There must have been an internal problem. Some ic's have gone bad. Go for a check to determine wat is to be changed.

It is a minor thing.

Rate this.

Sharp LC-26SH10U... | Answered on Oct 25, 2009 | 195 views


its a motherboard problem. i got one for sale or you can sell me the tv cause mine has a broken screen

Sharp LC-26SH10U... | Answered on Oct 24, 2009 | 293 views


you can sell it to me or i can sell you mine so you can get it fixed. its the motherboard. i got one but with a broken screen.

Sharp LC-26SH10U... | Answered on Oct 24, 2009 | 112 views


i have the same issue and after removing the back and doing a voltage test on cp506 and found the 24vdc that was suppose to be there lead me to the back light inverter. a very common problem for these tv's and if you can take a voltage test of vdc then you can confirm it! one problem the manufacture does not sell it seperate from the lcd panel so it is very expencive and to find them use they are hard to find because of them being a common problem! good luck and if you need help taking the voltage test let me know!

Sharp LC-26SH10U... | Answered on Oct 24, 2009 | 296 views


HI, you will need to replace the Digital PCB in this unit. the chip set has become unstable. there is some major circuit damage as well. AKA(PWB UNIT)


Sharp Part Number: A3Y004GDH0 $262.95

Sharp LC-26SH10U... | Answered on Jun 21, 2009 | 279 views


Failing power supply

Sharp LC... | Answered on Jun 27, 2019 | 54 views


Menu on remote and make sure you have it on wide screen or 16 to 9

Sharp LC... | Answered on Jan 17, 2019 | 44 views


Hello
If your Roku 3 player is not connecting to WiFi, it is possible that the WiFi signal from the router is out of range. In order to strengthen the signal, move the router and Roku 3 so that there are fewer objects and walls between them.
For any help or support just visit us: www Roku Com Link

Sharp LC... | Answered on May 26, 2018 | 94 views


When you say WD box, do you mean a Western Digital Hard Disk Drive? If so, get a Solid State Drive (SSD), and connect it via USB3.
The HDD or the USB connection is not fast enough to keep up with the required speed of the video.

If you mean something else, please add details.

Sharp LC... | Answered on Dec 05, 2017 | 46 views


Check the high voltage circuit on the board that has the 120 volts input. The high voltage should be close to 400 volts - nothing less than 390 volts. The capacitor is failing to hold the voltage and needs to be replaced.

Sharp LC... | Answered on Oct 29, 2017 | 167 views


Look for it at its bottom side [stand]

Sharp LC... | Answered on Sep 26, 2016 | 150 views


Hi,

Here you can get solution of your question/problem.
https://support.roku.com/hc/en-ca/articles/209403268-Roku-TV-Introduction

Sharp LC... | Answered on Sep 17, 2016 | 527 views

Not finding what you are looking for?
Sharp LC-26SH10U 26 in. LCD Television Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...