Mintek DTV-373-D 37 in. LCD HDTV - Answered Questions & Fixed issues


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

Mintek DTV-373-D... | Answered on Jan 31, 2016 | 35 views


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Disassemble & reassemble procedure to many popular brand TVs and other devices are given in detail with illustrations

Mintek DTV-373-D... | Answered on Aug 22, 2015 | 45 views


Back-light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/

Mintek DTV-373-D... | Answered on Aug 10, 2014 | 47 views


Almost every cable/satellite remote control thats used being
today, has an "Auto Programming Feature" on the remote.
Look up your model cable box online for remote codes and
I almost guarantee u will find the Auto Program instructions.
For Directv u hold mute+select button for about 3 seconds
the flashes and so on . . . "LOOK IT UP"

Mintek DTV-373-D... | Answered on Nov 15, 2013 | 94 views


check all capacitors on your power supply board, your voltages insufficient..

Mintek DTV-373-D... | Answered on Sep 10, 2013 | 34 views


The on l y way I've fixed this problem is by using a universal remote control. Using the input button, you should be able to switch it back to whatever mode you need. Hopefully your television is a major manufacturer.

Mintek DTV-373-D... | Answered on Sep 10, 2013 | 252 views


have you visualy check any open chip resistors on your power supply??if ok then thats the time to change the power supply board...

Mintek DTV-373-D... | Answered on Jul 18, 2014 | 69 views


If you are using a remote supplied by your cable company with their box, check their website for possible codes for your set.

Mintek DTV-373-D... | Answered on Oct 15, 2011 | 245 views


the cost of replacing an lcd screen will be nearly as expensive as the cost of a new tv and it is also a time consuming and delicate task of removing all the pcb boards (without blowing them) to take the original screen out and then replace it all again.

Mintek DTV-373-D... | Answered on Mar 18, 2012 | 104 views


unplug from the wall socket and plug back in and try

Mintek DTV-373-D... | Answered on Jan 18, 2011 | 201 views


Probably 2006 was the manufacturing date from the factory as the product listing started around then.

Mintek DTV-373-D... | Answered on Jan 03, 2011 | 20 views


I'm assuming you have Cablevision. This is becoming a known problem with their broadcasting system. They have been upgrading and it has been causing the TVs to freeze up on a specific channel .

Simple way to fix it:
1. Unplug tv
2. Unplug coax from tv
3. Plug tv back in
4. In the Menu go to Setup > CH setup > CH Memory > Cable (digital)
5. Enable channel skip for channel that it is currently stuck on
6. Push Menu to exit
7. Change to any other channel
8. Reconnect coax to tv.

Followup:
Avoid this channel and go give Cablevision a call and let them know about it. They won't do anything to fix it until they get a certain number of reported issues about the problem

Mintek DTV-373-D... | Answered on Dec 08, 2010 | 125 views


What a crock of **** this is guys! This FIX is surly a sad work around for the poor! Replace the mother board and solve your problem the correct way. No need to butcher up this TV. Better still, buy a name brand TV and a service contract which will save you money in the long run.

Dan Jackson - CET, which means Certified Electronics Technician

Mintek DTV-373-D... | Answered on Jun 29, 2011 | 2,032 views


Tries websites like Partstore.com,Ebay.com,Amazon.com to buy the LCD tvs power cords.

Mintek DTV-373-D... | Answered on Sep 02, 2010 | 60 views


Hi, sorry you are having issues with your programming. Here is a link to a site that may be useful to you.

http://www.remotecodelist.com/remotes/

Mintek DTV-373-D... | Answered on Aug 04, 2009 | 139 views


Try a code search, the method should be in the manual. If you can't get that to work then it's not possible to use the DirecTV remote.

If that's the case then get a learning remote.

Mintek DTV-373-D... | Answered on Jul 30, 2009 | 497 views


There are four screws on each side of the back of the TV(toward the bottom) - You have to remove those.

Mintek DTV-373-D... | Answered on Jun 22, 2009 | 206 views


Its not the power pack. The problem is with the dvd player which is also where the cable inputs converts through to the tv. if you are lucky enough to find a new internal dvd unit then you are in luck but I have'nt been able to. Your problem is an old isuues at least 2 years old...Sorry no Mintek tech support available.

Mintek DTV-373-D... | Answered on Jun 19, 2009 | 369 views


I have a Tv that the screen is broken. But the TV has like 3 mo of use. So for a good price for part you can have it.

Mintek DTV-373-D... | Answered on Feb 24, 2009 | 310 views

Not finding what you are looking for?
Mintek DTV-373-D 37 in. LCD HDTV Logo

72 questions posted

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Brad Brown

Level 3 Expert

18157 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...