20 Most Recent Westinghouse SK-32H240S Television - Page 8 Questions & Answers

I don't have DTV anymore, so I don't remember the exact code I used for my SK-32H240S, However, I do remember that I found one that worked at this site. Scroll down to locate your remote series # - it most likely will be printed on the upper left corner of the front of the remote - as an example, mine says RC64. Click on the corresponding listing, then follow the directions on the site. I tried only a few codes before finding one that worked correctly. Good luck.

Westinghouse... | Answered on May 08, 2009

its cathode ray tube or a colour wheel problem,,,check it,
thank u,,,,,,,,

Westinghouse... | Answered on May 03, 2009

look take the back cover off and look at the pwr fuse its located near the main on/off switch .replace if blown. before you switch back on is the set damp free you could have an ht leak so warm back of set make sure its perfectly dry an hair dryer works well but don't hold too close to single components.if all this works cover set at night with a towel over the air vents when not in use to avoid moisture on line transformer. this answer would work with an ht leak .but the problem could lie elsewhere . good luck farr64

Westinghouse... | Answered on Apr 30, 2009

One simple thing you can do is to Just hit the set with your hand nicely to find out if there is a bad connection inside the unit. This is the first thing I would do if I was to come over to fix it. Now with that said try hitting the back panel and the top and sides etc hard but not hard to break anything phsically. It might just be a bad solder connection inside that can be fixed rather cheaply.
Hope this helps and ask more if you need me

Westinghouse... | Answered on Apr 20, 2009

Is the LED light purple ?
Nearly all TVs are made in 3rd world countries using the cheapest labor possible with the cheapest parts, minimal quality control, non robust design, and no tests for long term durability.
If you have definitely determined that the main board is bad, someone knowledgeable in electronics can replace it. You can get one from the places like Ebay on the 'net.
I found a "pulled" one for about $123 at http://www.shopjimmy.com/tvrepairshops.cfm but you may do better if you look.

I have only read bad things about this model. Here are some of the things I have come across. Try this first. With the TV on, unplug it, wait a few seconds an plug it back in. You may also turn off the energy saving mode.

Westinghouse... | Answered on Apr 17, 2009

This is nothing to be afraid of. In LCD screens, it takes some time for the liquid crystal to heat up. Thats why manufacturers warn you not to change screen settings immediately after switching your TV on.
Hope this helps

Westinghouse... | Answered on Apr 16, 2009

just bring the unit into service tech near you . . . . . thats a huge troubleshoot that take an hour to repair........

Westinghouse... | Answered on Apr 09, 2009

Is the LED light purple ?

I have only read bad things about this model. Here are some of the things I have come across. Try this first. With the TV on, unplug it, wait a few seconds an plug it back in. You may also turn off the energy saving mode.

Beyond that the problem could be one of four problems;
1) Bad cable connection to inverter board. Make sure all cables are firmly seated.
2) Inverter board is bad.
3) Power to inverter board is bad.
4) CCFT(cold cathode fluoresent light) has problems.

Westinghouse... | Answered on Mar 25, 2009

You can find one on the 'net but it will not be cost effective.
You will be better off selling your set for parts and buying a new set. The LCD is the major cost of a set and when it goes, it's not worth replacing. Warrantees generally do not cover breakage either.

Westinghouse... | Answered on Mar 12, 2009

Partstore.com seems to have the part in stock. But, they don't describe if it's black or a different color.
It runs for $94.95 and their part# is 60.3YQ08.003
You may want to call them up to see if it's black.

I hope I answered your question. Please rate me. :)

Westinghouse... | Answered on Mar 04, 2009

power supply if led ligth stays blue and then after a few minutes changes to orange is your power supply.if light color goes to a purple that is your mainboard $$$$$$$$$$$

Westinghouse... | Answered on Feb 09, 2009

Make sure u have plugged in the audio cable to the tv.

Westinghouse... | Answered on Feb 01, 2009

Some solutions to this same problem were posted here, hope this helps.

Westinghouse... | Answered on Dec 30, 2008

Lines, and the screen going black are common among this particular T.V., but some solutions to a similar problem were posted here.

Westinghouse... | Answered on Dec 30, 2008

check the power fuse

Westinghouse... | Answered 2 days ago

check input or source if ok check picture settings

Westinghouse... | Answered on Jan 04, 2020

Not finding what you are looking for?
Televison & Video Logo

195 questions posted

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Westinghouse Televison & Video

  • Westinghouse Televison & Video

Most Popular Question

westinghouse tv model number sk 32h240s

  • Televison & Video