ViewSonic Optiquest Q19wb LCD Monitor - Answered Questions & Fixed issues


I have a whole box of them

send me your address. no charge

ViewSonic... | Answered on Aug 03, 2017 | 142 views


Check that screen cable is in on the motherboard or your graphics card,or install graphics card cause on board is blown.

ViewSonic... | Answered on Dec 31, 2013 | 32 views


Check the directx if it's up-to-date or not. It might be the reason why you are having this issue. Or it could be that there is a driver that you need to update. To make sure that it's not a driver problem, I suggest that you scan your computer with RadarSync. It's a PC driver updater.

David

ViewSonic... | Answered on Jul 21, 2013 | 61 views


Hello,

This type of problem is usually caused by a failure of the power supply board. The power supply puts out 5v and 12v to the electronics. If the power supply 5v side fails then the electronics does not get the right power but the back lights do so you get a white screen and no picture. The audio electronics are powered by a different power output. Here is a link to a repair guide for the Q19w that shows how to dis-assemble the unit and then which capacitors need to be replaced to revive the unit.

http://www.ccl-la.com/blog/index.php/how-to-repair-a-optiquest-q19wb-monitor/

I hope this helps, if so please rate my solution.

BuddyMc

ViewSonic... | Answered on Jan 01, 2012 | 100 views


Hello,

This is usually caused by a failure of the power supply board because of capacitor failure. The board is easily repairable if you can do a little soldering. Here is a a link to a page that shows how to open the monitor, remove the power supply board and what needs to be replaced to repair the unit.

http://www.ccl-la.com/blog/index.php/how-to-repair-a-optiquest-q19wb-monitor/


I hope this helps, if so please rate my solution.

BuddyMc

ViewSonic... | Answered on Sep 19, 2011 | 102 views


Try reseating the rinbbon cable (on the LCD panel) between the LCD panel and the main board first, otherwise the worst case will be new LCD panel. You sjould also lok for any caps with domed/leaking tops.
See examples here:
http://s807.photobucket.com/albums/yy352/budm/LCD%20panel/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.

ViewSonic... | Answered on Jun 30, 2011 | 121 views


I know this is an old post, but since it's the first Google result that shows up, here's the solution:

On the Q19wb press the '1' button, then use the arrow buttons to highlight "Audio Adjust" and press the '2' button to select. Then highlight and select "Volume" using the arrow keys and the '2' button. Then, adjust to a higher volume using the up arrow button.

Note: if you aren't getting any sould from your monitor follow similar steps above but select "Mute" and "Off" in the options.

ViewSonic... | Answered on Jun 10, 2011 | 729 views


it seems that this problem occurs because of faulty VGA card or may be your VGA adapter got damaged.if it is then replace your VGA adapter

ViewSonic... | Answered on Jun 01, 2011 | 85 views


When you get color casting on the screen (Red, Blue, or Green casting), it is either the pin on the video cable are bent or not insert properly, or broken cable inside the video cable, it can also be the video card/jack itself. You need to try this monitor with another PC first to find out where the problem is.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic... | Answered on May 22, 2011 | 81 views


Hi,

Regarding your concern, just connect the audio cable from the LCD to your computer. The audio cable should also be connected to the audio port found at the back of the LCD.

I hope we fixed it. Thank you for visiting FixYa!

ViewSonic... | Answered on May 03, 2011 | 90 views


Try unlocking it:
http://www.fixya.com/support/r4628438-aoc_monitor_lock_unlock_instructions

1) Press the MENU-button ( ) to activate the OSD window.

2) Press or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to
activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.

3) Press or to change the settings of the selected function. Press or to select another function in sub-menu .
Press AUTO( ) to exit . If you want to adjust any other function, repeat steps 2-3.

4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power
button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then
press power button to turn the monitor on.

5) Eco Mode hot key ( ) : Press the Eco key continuously to select the Eco mode of brightness when there is no OSD (
Eco mode hot key may not be available in all models).

6) Volume adjustment hot key : When there is no OSD , press Volume ( ) to active volume adjustment bar, press or
to adjust volume ( Only for the models with speakers).

ViewSonic... | Answered on Apr 17, 2011 | 608 views


Look on eBay for "Optiquest Q19wb repair" or "Optiquest Q19wb power"

This is a common failure mode. You can either buy a set of capacitors and solder them in, or buy a replacement power supply board if you cannot solder.

One eBay seller notes the power board as an ILPI-025, which is common among the following models:

Power Board ILPI-025 For LG W1934S & Viewsonic VG1930WM & Optiquest Q19WB & Acer AL1916W Ab etc
Model:ILPI-025 REV:E 79069140

ViewSonic... | Answered on Mar 08, 2012 | 513 views


The usual problem with this symptom is an CCFL power supply failure. The inverter is the board that powers the backlights so you can see what is on the screen. If you look really close and with a flashlight, you may be able to see the dark shadow of the image on the screen. Without the backlight, the LCD is useless.

You can get parts from places like http://www.lcdalternatives.com/ or eBay. Search for the model number and "repair" (e.g. "Optiquest Q19wb repair") on eBay.

ViewSonic... | Answered on Apr 12, 2011 | 369 views


Open and look at the tops of the capacitors. I bet there are at least 2-3 "bulging" tops. Replace them and the problem WILL be solved;.

ViewSonic... | Answered on Apr 08, 2011 | 468 views


Q19WB (vs11443) does not have built-in microphone, see user manual here: http://www.viewsonic.com/assets/034/8841.pdf

Are you using WEB CAM with micorphone built-in?
Please leave rating ifit helps.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Please leave rating if it helps.

ViewSonic... | Answered on Mar 04, 2011 | 63 views


Hi there,

Please read my tips to solve your problem, just click here

regards,
dm

ViewSonic... | Answered on Jan 05, 2011 | 61 views


What is it not doing?
See what is usually wrong with this model:
http://s807.photobucket.com/albums/yy352/budm/Optiquest%20Q19WB/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series

ViewSonic... | Answered on Dec 20, 2010 | 129 views


have you told the laptop to direct its output to the external screen? usually n and F5 keys

ViewSonic... | Answered on Dec 19, 2010 | 114 views


Q19WB?
Look for bad capacitors:
http://s807.photobucket.com/albums/yy352/budm/Optiquest%20Q19WB/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic... | Answered on Dec 17, 2010 | 134 views


Greetings, changing of your desktop resolution is explained in my published guide entitled How to set your Desktop Screen Resolution?
This will increase in clarity of your picture and give you a better experience.

Thanking you
damnor01

ViewSonic... | Answered on Dec 16, 2010 | 61 views

Not finding what you are looking for?
ViewSonic Optiquest Q19wb LCD Monitor Logo

96 questions posted

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...